Results 1 to 2 of 2

Thread: Some stand alone reverb unit ideas...

  1. #1
    Join Date
    Nov 2018
    Thumbs Up/Down
    Received: 26/0
    Given: 3/0
    Rep Power

    Some stand alone reverb unit ideas...

    Hey! I was hoping to get a nudge in the right direction in terms of what is out there as far as reverb circuits. Anything cool, uncommon, and very effective? I would really love to based it off a Reverb design that gives the most flexibility of color, using common tube types of course. Vintage ampeg reverb design is really intriguing to me, and I wonder if it has the potential to be brought to another level.

    Iím not sure how it would be done, but something I would like to incorporate is reverb gain. Iíve heard reverb units that offer the output to be slammed enough to provide a very effective.. boost? Can you even call it that? So in theory, it would be great to have something like this as a guitar preamp as well, and get some desirable saturation of the dry signal and maybe some ugly nasty tonal options when at maximum. Wondering where in a Reverb circuit you would put a control like this, and how it can be achieved. Thanks!

    0 Not allowed! Not allowed!

  2. #2
    Senior Member
    Join Date
    Jul 2011
    Adelaide, South Oz
    Thumbs Up/Down
    Received: 55/0
    Given: 4/0
    Rep Power
    There is a Weber kit 5G15 (expensive) based entirely upon the Fender 6G15 Standalone Reverb

    There is a thread here on current mode drive of Reverb Pans using a Pentode driver.
    Might be worth a look.

    A "tremoverb" with a Belton Reverb Brick rather than a spring pan.


    1 Not allowed! Not allowed!
    Last edited by Gingertube; 03-06-2019 at 03:39 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Some stand-alone reverb unit ideas...
    By Steelwitch in forum Build Your Amp
    Replies: 0
    Last Post: 03-05-2019, 11:24 PM
  2. New tube-driven stand-alone Vibrato unit build
    By tubeswell in forum Build Your Amp
    Replies: 14
    Last Post: 02-16-2012, 10:03 PM
  3. hum on stand by, any ideas ?
    By FatGaz in forum Debugging Your Build
    Replies: 4
    Last Post: 02-02-2012, 12:12 AM
  4. Modding the Alamo stand-alone reverb unit
    By Bob M. in forum Mods & Tweaks
    Replies: 5
    Last Post: 02-13-2011, 09:16 PM
  5. Hammond Organ Reverb into Stand Alone Reverb Unit
    By mitz in forum Music Electronics
    Replies: 8
    Last Post: 09-25-2008, 02:41 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts