Announcement

Collapse
No announcement yet.

Peavey Transtube Transformer 112 not initializing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Peavey Transtube Transformer 112 not initializing

    I have a Peavey Transformer 112 that will not initialize the startup sequence at power up. The preset dial LEDs stay lit, and nothing else happens. There is some hum coming from the speaker, sounds like normal noise (dirty power around here), nothing changes with volume control. Any assistance on this is much appreciated. Thank you!

  • #2
    How 'bout a schematic for starters?

    Edit: Have you tried initializing the amp? (Turn the unit on while pressing and holding down both the STORE and
    USER buttons simultaneously)
    Last edited by The Dude; 04-02-2019, 02:36 AM.
    "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

    Comment

    Working...
    X