Announcement

Collapse
No announcement yet.

Replacement thermistor values

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacement thermistor values

    Hi, I have a behringer B205D monitor that powers up but has no sound output. I've gone inside and discovered what I believe to be a blown thermistor. It looks to be a chinese one, green disc with no values on it. The behringer schematic has it as R1 with a value of 10. Am I correct in thinking that this is 10ohm and if so what can I safely replace it with so get the monitor working again.
    Grakart

  • #2
    Please post the schematic you mention.

    And, what does "powers up" exactly mean?
    Do any lights come on?
    Do you hear any pop/click/hiss?
    Any other sign of life?
    Juan Manuel Fahey

    Comment


    • #3
      R1 is indeed a NTC thermistor with a value of 10 ohms.
      It is used to limit inrush current at startup of the unit.

      https://www.newark.com/epcos/b57464s...20/dp/29M3208#

      B205D schematic: B205D SCHEMATIC.zip

      Comment

      Working...
      X