Results 1 to 8 of 8

Thread: Rechargeable 9v battery and low charge indicator?

  1. #1
    Old Timer olddawg's Avatar
    Join Date
    Dec 2007
    Location
    La Jolla CA, Hanalei, Kauai
    Posts
    2,894
    Thumbs Up/Down
    Received: 219/0
    Given: 23/0
    Rep Power
    14

    Rechargeable 9v battery and low charge indicator?

    Click image for larger version. 

Name:	F7CC9675-65AA-499A-BA72-8DBB474CE993.jpeg 
Views:	20 
Size:	1,004.2 KB 
ID:	53922
    I picked up one of these to go to weeknight bar jams and bring minimal equipment. 4 effects in one small package, analog, no digital menus, the size of about 3 packs of cigarettes. It’s a VERY sturdy steel case. The problem is that it uses an external 9vdc supply so the wire and finding an outlet is always an issue. So... I was thinking about modding it with an internal rechargeable 9v battery. I would also like to add a “low battery indicator” led and don’t want to reinvent the wheel. Has anyone ever done this? Got a circuit diagram?

    0 Not allowed! Not allowed!
    Last edited by olddawg; 06-12-2019 at 01:24 AM.

  2. #2
    Old Timer olddawg's Avatar
    Join Date
    Dec 2007
    Location
    La Jolla CA, Hanalei, Kauai
    Posts
    2,894
    Thumbs Up/Down
    Received: 219/0
    Given: 23/0
    Rep Power
    14
    Click image for larger version. 

Name:	32AC2D79-49CB-458E-B248-D93AB5ABD66B.jpeg 
Views:	17 
Size:	175.3 KB 
ID:	53930

    Guess I’ll build this on a square of perf board and order a battery or 2 that will fit.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	41DFC0B5-FD27-49D5-8BE4-50F1D05B0626.jpeg 
Views:	15 
Size:	129.2 KB 
ID:	53929  

    0 Not allowed! Not allowed!
    Last edited by olddawg; 06-12-2019 at 06:56 AM.

  3. #3
    Lifetime Member Enzo's Avatar
    Join Date
    May 2006
    Location
    Lansing, Michigan, USA
    Posts
    31,594
    Thumbs Up/Down
    Received: 1,480/7
    Given: 0/0
    Rep Power
    54
    If you didn't already, google "low battery indicator" and get much information.

    0 Not allowed! Not allowed!
    Education is what you're left with after you have forgotten what you have learned.

  4. #4
    Old Timer olddawg's Avatar
    Join Date
    Dec 2007
    Location
    La Jolla CA, Hanalei, Kauai
    Posts
    2,894
    Thumbs Up/Down
    Received: 219/0
    Given: 23/0
    Rep Power
    14
    Yeah Enzo.. I did. I was just wondering if the pedal makers out there use a “standard” circuit. I’m surprised there aren’t more rechargeable pedals out there.

    0 Not allowed! Not allowed!

  5. #5
    Don't forget the joker g1's Avatar
    Join Date
    Feb 2010
    Location
    Canada, somewhere north of Fargo
    Posts
    11,294
    Thumbs Up/Down
    Received: 1,244/21
    Given: 3,145/8
    Rep Power
    22
    That enclosure looks a lot like the Tech21 fly rigs.
    Hope it's not the same as those boards are a nightmare to get out of the steel case.

    0 Not allowed! Not allowed!
    Just because they don't have tubes doesn't mean they don't have feelings! - glebert

  6. #6
    Old Timer J M Fahey's Avatar
    Join Date
    Oct 2007
    Location
    Buenos Aires, Argentina
    Posts
    11,262
    Thumbs Up/Down
    Received: 1,443/18
    Given: 1,101/27
    Rep Power
    26
    What current does your pedal need?
    Absolute worst case, measure when you get it, being analog power consumption "should" be reasonable .
    Battery indicators use power for themselves, so one old Boss solution on some pedals was to wire a red "test" Led in series with a resistor, say 1 or 2k to limit current, and a 5.6V Zener PLUS a temporary normally open "Battery test" switch, so Led eats current *only* for a few seconds, while you push the button

    Since Red leds drop some 1.9V ; LED would NOT turn on below 7.5V , which shows a well used battery but still with enough juice to finish the night well.
    So now and then you push the test button; if Led lights, fine; if not , finish your show but first thing in the morning replace that battery.

    1 Not allowed! Not allowed!
    Juan Manuel Fahey

  7. #7
    Old Timer olddawg's Avatar
    Join Date
    Dec 2007
    Location
    La Jolla CA, Hanalei, Kauai
    Posts
    2,894
    Thumbs Up/Down
    Received: 219/0
    Given: 23/0
    Rep Power
    14
    Yeah.. I’m assuming, since it has 4 analog effects, that it will draw roughly 5X what a stand alone pedal does on average. I just need the charge to last 4 hrs. So I thought a larger or a couple of rechargeable 9v batteries will work and be able to be recharged from the included power supply... and also be able to power it off of the supply of course.

    0 Not allowed! Not allowed!

  8. #8
    Senior Member
    Join Date
    Mar 2018
    Location
    Germany
    Posts
    1,490
    Thumbs Up/Down
    Received: 1,082/1
    Given: 676/2
    Rep Power
    4
    The (chemical) discharge process of a battery is different from discharging a capacitor. A weak battery primarily shows increased series resistance while no-load voltage may still be nominal. So testing of a battery is preferably done with a load (current) similar to the application - or connected to the designated load.

    0 Not allowed! Not allowed!
    - Own Opinions Only -

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 09-28-2016, 11:32 PM
  2. Rechargeable battery pack idea for FX pedals
    By Steve A. in forum Guitar Effects
    Replies: 13
    Last Post: 03-10-2016, 04:03 AM
  3. Rechargeable battery pack for FX?
    By Steve A. in forum Music Electronics
    Replies: 15
    Last Post: 08-15-2013, 10:08 PM
  4. What to charge for???
    By Danglin' Fury in forum Maintenance, Troubleshooting & Repair
    Replies: 7
    Last Post: 11-26-2012, 02:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •