Announcement

Collapse
No announcement yet.

Hartke A70 power amp failure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Well.

    I have listened to your advice and turned it on without the light bulb limiter. And again all my suspicions, it is working fine.

    In the beggining, I turned it on and there was a terrible hum so I turned it off and put the limiter, I change the volumen pot because it has a problem, and then I detected the cap failure. But any time I turned it on the light bulb shined on. So I asumed there was something else wrong.

    Thanks

    Comment

    Working...
    X