Results 1 to 4 of 4

Thread: Behringer PSU18 PCB HELP!!!

  1. #1
    Member
    Join Date
    Dec 2011
    Posts
    29
    Thumbs Up/Down
    Received: 1/0
    Given: 4/0
    Rep Power
    0

    Behringer PSU18 PCB HELP!!!

    Problem is

    0 Not allowed! Not allowed!

  2. #2
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,492
    Thumbs Up/Down
    Received: 694/1
    Given: 570/1
    Rep Power
    13
    I hate problems like that. You just don't know where to start!

    1 Not allowed! Not allowed!
    Experience is something you get, just after you really needed it.

  3. #3
    Member
    Join Date
    Dec 2011
    Posts
    29
    Thumbs Up/Down
    Received: 1/0
    Given: 4/0
    Rep Power
    0
    Behringer PSU18 PCB No High Voltages Supply, HELP, LIGHT, SUGGESTIONS!!!
    Problem is with EPA900 which powers on and all front mixer works well but not any sound. Speakers tested separately works perfect, output connectors tested and are good.
    So, working with the PSU18 (PCB827110REVB/01) separately (disconnected it from the mixer and amp modules power connectors, there is no any High Voltages power supply (+-40/80DCV), but the Low side voltages supply (+-15VDC, V15, +5V, +48) all are working good including the fan is working.
    The VREF for U4-U5 is +4.8V, the +16V is measuring +12.8V only, and pin 10 of U5 is On with +3.8V.
    When powers the PSU on about 4 seconds later the relay (K1) clicks on but inmediately clicks off, the thing tryed to start up but quickly kills itself.
    All the rectifiers diodes tested ok, including the High Voltages secondary diodes D1-5. So ?????
    Appreciate a lot all your amiable suggestions, will waiting. THANKS!!!

    0 Not allowed! Not allowed!

  4. #4
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,492
    Thumbs Up/Down
    Received: 694/1
    Given: 570/1
    Rep Power
    13
    What is pin 1 of IC4 doing?

    Behringer_PSU18_Power_Supply_Schematic.pdf

    0 Not allowed! Not allowed!
    Experience is something you get, just after you really needed it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Behringer PMP960M power supply PSU18
    By Mick Bailey in forum Music Electronics
    Replies: 6
    Last Post: 06-03-2015, 05:45 AM
  2. Behringer GMX 212 Help
    By Tubbyspark in forum Maintenance, Troubleshooting & Repair
    Replies: 3
    Last Post: 12-12-2014, 08:18 AM
  3. Behringer PSU18 pinout
    By blasterstef in forum Schematic Requests
    Replies: 0
    Last Post: 06-10-2014, 11:10 PM
  4. Replies: 6
    Last Post: 10-21-2013, 11:11 PM
  5. Behringer LX1-112
    By Valvehead in forum Schematic Requests
    Replies: 6
    Last Post: 07-27-2012, 12:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •