Announcement

Collapse
No announcement yet.

EPK pcb troubles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • EPK pcb troubles

    Hi, I got some EPK pcbs I ordered from their site https://effectpedalkits.com
    Checking the pcbs I fould out that they are faulty, missing continuity between several soldering pads, e.g. no continuity on grounds etc.. Asking meanwhile several times for fixing, replacement or checking their obviously faulty designed pcbs, I got no answer from EPK.
    Any similar bad experiences with EPK pcbs?
    Thanks for reply
    Zouto

  • #2
    Problems solved, after a short time I finally got an answer, rechecked pcb and wiring, replaced a bad cable, the circuit is working fine now. The pcb was ok, internally broken ribbon cable was the culprit.
    Last edited by Zouto; 06-25-2019, 11:36 AM.

    Comment


    • #3
      Originally posted by Zouto View Post
      Problems solved, after a short time I finally got an answer, rechecked pcb and wiring, replaced a bad cable, the circuit is working fine now. The pcb was ok, internally broken ribbon cable was the culprit.
      Just curious (very) about your:
      missing continuity between several soldering pads, e.g. no continuity on grounds
      a
      broken ribbon cable
      does not explain that.
      Care to elaborate?

      Maybe post a PCB picture and say: "I didnīt have continuity between here and here"
      Juan Manuel Fahey

      Comment

      Working...
      X