Announcement

Collapse
No announcement yet.

Kustom Hustler Combo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Check to see if the LFO is running. Those chips that are listed as 80848 are LM3080 transconduction amps. There is a control voltage applied to pin 5, so check that pin to see if there is a fluctuating voltage there that is controlled by the LFO controls, (speed and depth).

    Comment


    • #17
      Originally posted by dmeek View Post
      The zip file contains the images from that site that I saved by screen capture. They are a bit fuzzy but I don't see why you can't print them.
      I have another, better copy of the schematic only:

      https://music-electronics-forum.com/...1&d=1561505144
      Thanks..can't print them for some reason..anyway I will have to open them up on my computer.......
      Cheers

      Comment


      • #18
        Originally posted by 52 Bill View Post
        Check to see if the LFO is running. Those chips that are listed as 80848 are LM3080 transconduction amps. There is a control voltage applied to pin 5, so check that pin to see if there is a fluctuating voltage there that is controlled by the LFO controls, (speed and depth).
        Thanks..I'll check that out...
        Cheers

        Comment

        Working...
        X