Announcement

Collapse
No announcement yet.

Question on a power supply

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by nosaj View Post
    Not sure how I'd mount it. Here's some pics of board and heatsink. Put an apple phone charger on board for size reference.
    nosaj[ATTACH=CONFIG]54355[/ATTACH][ATTACH=CONFIG]54356[/ATTACH]
    Some reason I was thinking t03 instead of to220. i found this regulator L78S05CV and do 2amps.

    nosaj
    soldering stuff that's broken, breaking stuff that works, Yeah!

    Comment


    • #17
      Just pay attention to the basing diagram.
      "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

      Comment


      • #18
        Originally posted by The Dude View Post
        Just pay attention to the basing diagram.
        Yea i pulled those up, flying leads it will be.

        nosaj
        soldering stuff that's broken, breaking stuff that works, Yeah!

        Comment


        • #19
          While you're in there, how's that ni-cad holding up?
          Used to be we would disconnect the charging circuit and put a lithium coin cell in when they needed replacing.
          Originally posted by Enzo
          I have a sign in my shop that says, "Never think up reasons not to check something."


          Comment


          • #20
            Originally posted by g1 View Post
            While you're in there, how's that ni-cad holding up?
            Used to be we would disconnect the charging circuit and put a lithium coin cell in when they needed replacing.
            That is actually a lithium, but since organ was made around 85-88 I intended on changing it anyways just to prevent a leakage.

            nosaj
            soldering stuff that's broken, breaking stuff that works, Yeah!

            Comment

            Working...
            X