Announcement

Collapse
No announcement yet.

switch for a carvin V3 head

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • switch for a carvin V3 head

    Got a carvin V3 head to replace a b1m pot which I found the right one at mouser. But the switch seems to be a little harder to find if anyone could help.

    Thanks,
    nosaj

    schematic http://carvinimages.com/schematics/v3m_blocked.pdf

    pic red object is the back of the switchClick image for larger version

Name:	IMG_20190714_183928834.jpg
Views:	1
Size:	2.32 MB
ID:	874752
    soldering stuff that's broken, breaking stuff that works, Yeah!

  • #2
    What is the switch function and where is it on the schematic?
    Originally posted by Enzo
    I have a sign in my shop that says, "Never think up reasons not to check something."


    Comment


    • #3
      Originally posted by g1 View Post
      What is the switch function and where is it on the schematic?
      s10 bottom left of schematic

      nosaj
      soldering stuff that's broken, breaking stuff that works, Yeah!

      Comment


      • #4
        Ok, but the board looks like it says S4 there?

        Maybe one of these:
        Attached Files
        Originally posted by Enzo
        I have a sign in my shop that says, "Never think up reasons not to check something."


        Comment


        • #5
          Originally posted by g1 View Post
          Ok, but the board looks like it says S4 there?

          Maybe one of these:
          S10 is over to the right under input jack. s4 looks the same from the backside.

          I'll look. Thanks,
          nosaj
          soldering stuff that's broken, breaking stuff that works, Yeah!

          Comment


          • #6
            Originally posted by nosaj View Post
            S10 is over to the right under input jack. s4 looks the same from the backside.

            I'll look. Thanks,
            nosaj
            Ok no one has the carling but using the data you provided I did find Grayhill and I did find what will work.
            https://www.mouser.com/ProductDetail/706-34ADP12B4M7GTThe mouser pic is not correct but using that datasheet I confirmed it is what is needed.

            Thanks G1!!

            nosaj
            soldering stuff that's broken, breaking stuff that works, Yeah!

            Comment


            • #7
              I was just going to say that Grayhill seems to be where the stock is at.
              Here's the datasheet for the Grayhill 34A series if anyone should need (34B series similar but with plastic bushing):
              Attached Files
              Originally posted by Enzo
              I have a sign in my shop that says, "Never think up reasons not to check something."


              Comment


              • #8
                Originally posted by nosaj View Post
                Ok no one has the carling but using the data you provided I did find Grayhill and I did find what will work.
                https://www.mouser.com/ProductDetail/706-34ADP12B4M7GTThe mouser pic is not correct but using that datasheet I confirmed it is what is needed.

                Thanks G1!!

                nosaj
                This part looks exact, the bat is the same lenght looks identical to the others in the amp.
                nosaj
                soldering stuff that's broken, breaking stuff that works, Yeah!

                Comment

                Working...
                X