Announcement

Collapse
No announcement yet.

Help identifying this part...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help identifying this part...

    From a Carvin BX500, the top of this chip broke away from the lower half (where the legs are), looks like it burned. It looks to be some kind of power supply chip, on the chip itself, it reads "Q110 VA17". The schematic specifies FSDH0265RN, the part circled in red, Q803. Any help in tracking down a replacement would be awesome. Thx!

  • #2
    Is this it?

    FSDH0265RN Datasheet

    Comment


    • #3
      Click image for larger version

Name:	chip1.jpg
Views:	1
Size:	116.5 KB
ID:	854290
      Click image for larger version

Name:	chip4.jpg
Views:	1
Size:	236.5 KB
ID:	854292
      Last edited by acorkos; 07-16-2019, 12:09 AM.

      Comment


      • #4
        Here's the datasheet.

        https://www.promelec.ru/pdf/FSDH0265RN.pdf

        It's a PS switching IC. Everything I can find says it's discontinued. The only place I could find it was on eBay from China, which is a bit risky. Maybe someone else knows of a source or a substitute.

        Edit: Looks like Tom beat me to the datasheet.
        "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

        Comment


        • #5
          that's it on the datasheet, I can get one from China on Ebay, can't find one anywhere else. Any ideas? Thx

          Comment


          • #6
            Fwiw I have bought used pulled obsolete chips from several places without any problems.

            Comment


            • #7
              This product looks pretty identical to me, but have not gone through every parameter. It is in stock at Digikey for sure.

              https://www.onsemi.com/pub/Collateral/FSFM300-D.PDF

              Comment

              Working...
              X