Announcement

Collapse
No announcement yet.

Peavey Bass Amp Max115

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Peavey Bass Amp Max115

    Hi all

    I just purchase a used Peavey Bass Amp Max115. and the speaker is good, but I am not getting and sound to the speaker. if I turn the volume up all the way and the gain up I get some sound. So I checked the speaker, works fine.
    any help will be great.

  • #2
    Welcome....

    Did you ever hear this amp working before you bought it? How do you know the speaker is good?

    And did you try a different instrument and cable?

    Did you test the amp by inserting a signal at the Aux input?

    What about Tune/Mute button, is that engaged?

    Comment


    • #3
      Hi Tom
      I checked the speaker by unplugging from the amp and plug it in a smaller amp that I have and speaker worked fine. Mute button off after tuning guitar. cable was tested on small amp. I did not test amp at the AUX. Also I just left the amp run for about 8 min. and now there is no sound at all.

      Comment


      • #4
        Also I had the earbuds to test amp, sounds where great going to earbuds. after 8 mins. no sound at all. no where.

        Comment


        • #5
          It turns out there is another thread on this site that you might review - https://music-electronics-forum.com/...ass+Amp+Max115

          It sounds like a similar problem. Maybe the solution is there too.

          Comment

          Working...
          X