As I have no formal training in electronics, I still have some gaps in understanding the basics, and I greatly appreciate any comments as they would help to solve my riddles !
Questions :
As always, Thanks for your help and your time, you gents are superb !
Questions :
- When would you use a resistor to lower or raise voltage, or when would you use a Voltage divider from two resistors instead, and what are the advantages / disadvantages of using a series resistor vs. a voltage divider ?
- Are there any other cautions to be considered using two resistors to divide voltage, provided they are sufficient in wattage / temperature ratings ?
- How does and to what extent does a resistor reduce AC ripple in an HT line, and what parameters of the resistor should be considered ?
- Are Voltage ratings in fuses important ?
- Do the coupling capacitors and the resistors dumping to ground just before power tubes create a low pass filter only or are the resistors doing other things as well, as in an Overall attenuation of the signal ?
As always, Thanks for your help and your time, you gents are superb !
Comment