Announcement

Collapse
No announcement yet.

Ampeg R-12-R hum problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ampeg R-12-R hum problem

    Hello everyone

    I have been trying to restore an old Ampeg R-12-R with only partial success.

    The problem left is excessive hum. The hum is present with or without guitar connected, and regardless of the volume control position. If the vibrato is turned up, that modulates the hum. The hum disappears if I take out the phase inverter tube, but not if I take out the other preamp tubes.

    The amp has had a major refurbish. Power transformer replaced, all tubes replaced, all capacitors replaced. It's a real shame because I invested a lot of time and money into it, but the hum is still a major concern.

    I would really appreciate if someone might have a suggestion on what to check, or if there is anything specific I should try out.

    Thanks in advance

  • #2
    Is this the right one?

    https://ampeg.com/support/files/Sche...Schematics.pdf
    It's weird, because it WAS working fine.....

    Comment


    • #3
      Yes, we need the schematic so we know exactly which model we're discussing.

      Comment


      • #4
        Is this the same amp from a thread you had from 2017?

        https://music-electronics-forum.com/...ad.php?t=44679
        When the going gets weird... The weird turn pro!

        Comment

        Working...
        X