Results 1 to 3 of 3

Thread: Strat covers with 1/4" holes

  1. #1
    Senior Member
    Join Date
    May 2006
    Thumbs Up/Down
    Received: 3/0
    Given: 0/0
    Rep Power

    Strat covers with 1/4" holes

    Probably a dumb/futile search but thought I would ask. Are there any Strat covers out there with holes for 1/4" rods? I've modified some before but it's a pain and if there's a quick fix for this, inquiring minds want to know...

    0 Not allowed! Not allowed!

  2. #2
    Join Date
    Aug 2015
    Edmonton, AB
    Thumbs Up/Down
    Received: 232/3
    Given: 120/3
    Rep Power
    I assume the stock holes are less than 1/4" ?

    If so, a step drill would be the cleanest and easiest way to open them up to 1/4".

    They are great for drilling clean holes in thin material.

    If you do this, don't get a cheap one!
    The cheap step bits are just that.
    I have a cheap one and it is next to useless.

    The quality one's are worth the coin.

    I now have a couple of the Irwin brand single flute type. #1 and #4.

    They are great!

    0 Not allowed! Not allowed!
    The world is full of people that are right.

  3. #3
    Old Timer
    Join Date
    May 2006
    Boston, MA area
    Thumbs Up/Down
    Received: 26/0
    Given: 0/0
    Rep Power
    Yes, this is the best way. Best to make a wooden fixture to hold the cover in place while drilling.

    If cover is brass or german silver, lubricate with kerosene or the like. If stainless steel, use black sulfur oil from the hardware story. Use an acid brush to apply.

    0 Not allowed! Not allowed!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. No holes pickup covers for Fender Jazz Bass 5
    By alexandreprocesso in forum Pickup Makers
    Replies: 5
    Last Post: 08-11-2012, 05:50 AM
  2. Tool For Stamping Holes in Nickle Covers ?
    By Electricdaveyboy in forum Pickup Makers
    Replies: 15
    Last Post: 06-22-2010, 06:11 AM
  3. Pores/holes in Strat pup. magnets ?
    By the great waldo in forum Pickup Makers
    Replies: 10
    Last Post: 11-25-2009, 08:00 AM
  4. No holes humbucker covers?
    By j. pierce in forum Pickup Makers
    Replies: 1
    Last Post: 12-27-2008, 08:52 AM
  5. Soapbar P-90 covers with no holes?
    By David Schwab in forum Pickup Makers
    Replies: 3
    Last Post: 03-21-2008, 12:30 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts