Announcement

Collapse
No announcement yet.

Egnater Tourmaster 4212

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Egnater Tourmaster 4212

    Clean/Vintage channels 1/2 work, as does Overdrive 1, but no dice on Overdrive 2. I can hear super quiet signal, but stays super quiet even with volumes dimed. Tried a new V8 tube, no good. All resistors to plates grids and cathodes are reading in value. Put a scope to it and signal looks dirty. No help from Egnater with a schematic either. Not sure where to go from here.

  • #2
    https://music-electronics-forum.com/...l=1#post542231

    Comment


    • #3
      I can’t access the schem from my phone, I don’t own a computer.

      Comment


      • #4
        You'll need to install an app for reading .pdf files. Adobe Acrobat is one of many.
        "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

        Comment

        Working...
        X