Link the 2 channels

[Reimer]

Hey new here.

can I link the two channel on my old 5e3 tweed fender amp, without anything happens, like I do on my Vox AC-30TB? if not what too do to make it work like the AC-30TB?

Thanx to this very very fine forum

Reimer

[clyde]

What you can do is plug your guitar into the bright high input and then run a jumper from the bright low input to the normal high input. I assume this what you are tring to do.

The way I normally do it is plug into the normal low input, and then jumper the normal high to the bright low. Just depands on what you want to do.

I have not encountered any problems doing this. I find it kind of nice to be able to run both channels at the same time and control the volume per channel independent of each other.