Announcement

Collapse
No announcement yet.

Blues Deluxe Reissue-No Sound

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Also, earlier amps had 330R resistors which were later replaced with 470R to give the zeners an easier time. I usually replace the resistors if they're 330R and form the leads of a pair of new zeners to give them a 3/8" standoff from the board. As an upgrade I offer a pair of 15W metal clad resistors mounted on a heatsink connected back to the PCB with flying leads, though sometimes this is necessary anyhow if the board is well toasted.

    Comment

    Working...
    X