Announcement

Collapse
No announcement yet.

Samson XM 610 Power Mixer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Jazz P Bass View Post
    Other way around.
    The jacks are before the switches.
    this is telling me the preamp on the monitor side is malfunctioning, which is on the mixer board. am i right assuming this?

    sorry for being a dumb ass

    thanks Jazz

    Comment


    • #17
      Yes, there is some problem in the monitor side of the mixer section.
      But there must also be a problem with the amp select switch. Amp1 connects to the same point whether switched to main/main or main/mon. You said Amp1 is not working in the main/mon position. Could be a bad switch, or bad connection to the switch.
      (this is all assuming you are calling Amp Left Amp1)
      Originally posted by Enzo
      I have a sign in my shop that says, "Never think up reasons not to check something."


      Comment


      • #18
        Originally posted by g1 View Post
        Yes, there is some problem in the monitor side of the mixer section.
        But there must also be a problem with the amp select switch. Amp1 connects to the same point whether switched to main/main or main/mon. You said Amp1 is not working in the main/mon position. Could be a bad switch, or bad connection to the switch.
        (this is all assuming you are calling Amp Left Amp1)
        Switch tests ok

        This is getting over my head. anyone here willing to fix this if i ship it to you? if so give me an estimate. probably not worth the money but i'm curios as hell to find out wants wrong with this unit

        thanks

        Comment


        • #19
          Originally posted by daviddwitty View Post
          Switch tests ok

          This is getting over my head. anyone here willing to fix this if i ship it to you? if so give me an estimate. probably not worth the money but i'm curios as hell to find out wants wrong with this unit

          thanks
          Post your location.
          nosaj
          soldering stuff that's broken, breaking stuff that works, Yeah!

          Comment


          • #20
            Originally posted by nosaj View Post
            Post your location.
            nosaj
            Danbury CT

            Comment


            • #21
              From there you could drive it right to Samson.
              Education is what you're left with after you have forgotten what you have learned.

              Comment


              • #22
                Samson no longer services these models

                Comment


                • #23
                  This is every day fare for a competent amp tech. If you have a repair shop in your area that handles a general line of music electronics, they should be able to handle it.
                  Education is what you're left with after you have forgotten what you have learned.

                  Comment


                  • #24
                    Thanks to everyone for your input. Great forum

                    Comment

                    Working...
                    X