Results 1 to 27 of 27

Thread: Covid19 shutdown causing loss of lab/tool assets

  1. #1
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13

    Covid19 shutdown causing loss of lab/tool assets

    Being among the millions of financial victims from the Covid19 Virus shutdown of jobs & financial flow from servicing the entertainment industry’s gear, my two storage lockers are now about to be lost, no longer having the funds to keep them. With that loss, I face losing nearly everything I have packed away within, and would sure love to find homes for as much of this gear as possible. Shame all of you that aren’t in the LA/Orange County area aren’t nearby for a great score.

    While I have many of my lab assets at my shop at CenterStaging, the rest of the lab assets I had acquired over the years at BGW Systems and other shorter-term engineering positions, tomorrow I’m making a dash down the freeway from my home in Glendale to Torrance, where my two storage lockers are located. One is 14’ x 12’, the other is 12’ x 10’. Packed full of my technical library, all my lab instrument owners/service manuals, scopes (Analogic 6000, 6100B, LeCroy 7200, 7200A, Nicolette 3091, Tektronix 7834, R7623A, R5031, R5030), Spectrum & Network Analyzers (HP 3570A/3571A/3330B, 3575A, Bafco 916AxH, Wandall & Goltermann SPM19/PS19/SG4, HP3591A, HP 3581A, Rockland FFT512/S, Kay DSP5500), Arbitrary Generators (Analogic 2020-25, LeCroy 9112, 9101, Wavetek 75), Oscillators (HP 204D, 3330B, Krohn-Hite 4300A,Optimation Decade Osc), Function Generators (Exact 202, Wavetek 132, 185, 186, 98), Filters (Krohn-Hite 3750, Rockland 1000F, 452, 752A, 2582), Bridges (GR1650A, ESI 296), DMM’s (Racal-Dana 6002, Simpson 460’s, Data Precision 1450’s, Tek DM501A’s, DM502’s, HP3467A’s), Power Supplies (HP 6823A, Preston-Scientific 101’s), Plotters & Recorders (B & K 2305, 2307, HP 7041A, 7046A, 7090A, 7132A’s, 7475A, 7550B, Teac XR-510’s), Tektronix TM500 Series mainframes & instruments, Tek 7000 series plug-ins, cables, adapters, Tek scope probes, B & K Filters, numerous other instruments.

    I’ve placed a number of photos I had taken (using the low-resolution Sony Mavica Digital Camera) when I repacked the lockers after moving from Gardena, CA to Glendale, CA in 2015.

    Click image for larger version. 

Name:	Locker 119-22.jpg 
Views:	61 
Size:	149.6 KB 
ID:	57535 Click image for larger version. 

Name:	Locker 119-36-21715.jpg 
Views:	52 
Size:	130.4 KB 
ID:	57536 Click image for larger version. 

Name:	Locker 119-42-22415.jpg 
Views:	49 
Size:	264.9 KB 
ID:	57537 Click image for larger version. 

Name:	Locker 119-39-21715.jpg 
Views:	52 
Size:	122.4 KB 
ID:	57538 Click image for larger version. 

Name:	Locker 119-40-21715.jpg 
Views:	50 
Size:	129.6 KB 
ID:	57539 Click image for larger version. 

Name:	Locker 119-37-21715.jpg 
Views:	45 
Size:	107.5 KB 
ID:	57540 Click image for larger version. 

Name:	Locker 119-23.jpg 
Views:	46 
Size:	141.0 KB 
ID:	57541 Click image for larger version. 

Name:	Locker 119-6.jpg 
Views:	44 
Size:	265.4 KB 
ID:	57542

    Then all my camera assets (three 4 x 5 cameras, lenses), 35mm Nikon F2’s & loads of lenses, Gitzo & Bilora tripods, tripod dollies, Matthews light stands, hot lights, flash equipment, etc. Darkroom assets (Beslar and Durst enlargers, great assortment of lenses, 6-ft sink, tray ladders & trays, archival print washer, Saunders 4-bladed easels, MacBeth Transmission/Reflection Densitometers, Setra Digital scale (chemical bench use), film development tanks & reels (35mm, 120mm, 4 x 5, 8 x 10), chemical lab glassware…beakers, stirrer/hotplates. Thomas Duplex Safelight, Graylab Digital Darkroom timers, chemicals for mixing developer, bleach, fixers. Seal Commercial Dry Mount Press, Print dryer, light tables, print mounting tools, etc.

    Roland TD-10 V-Sessions electronic drum kit. JBL 2385 Horn/Lens (2) with 2380 Drivers, mtd in cases.

    Wood & Metal working tools, 6” Atlas Jointer, 18” Dewalt Planer, Disc/Belt sander. Paper Shears, Drafting Table (Stacor 42” x 30” footpedal height/tilt), Gerstner tool boxes, Kennedy Machinist Chest, lab bench & shelving/pedestal/shelving. Shelving/bunkbed assembly (allocated to storage locker use with loft).

    Click image for larger version. 

Name:	Locker 119-15.jpg 
Views:	42 
Size:	130.6 KB 
ID:	57543

    The reality of now having to salvage what I can keep, and find a home for everything else, or the storage locker facility ends up with it all due to no funds to keep the lockers, and no place to move it all to………that’s my sudden reality of what the Covid19 Virus Pandemic has placed on me. I'd hate to have the Storage Locker facility end up with it all. Hoping I can track down a couple of the Photography Dept instructors I had classes with at both El Camino College in Torrance, and see what I can donate to the school.

    I’ve rented a pickup truck and driving down to the lockers tomorrow to extract what I can during the day, and take new photos with the Apple iPhone 5 that ‘xtian’ sent me (I owe you big time for this, Aaron!). I’m sure there are some treasures in the lockers that I can find for you.

    More details to follow. I'll have the lockers for another month at least....thru the end of April. What happens then, I hate to think about. My apartment is going to get a bit crowded tomorrow, I suspect.

    0 Not allowed! Not allowed!
    Last edited by nevetslab; 03-27-2020 at 12:38 AM.
    Logic is an organized way of going wrong with confidence

  2. #2
    Senior Member
    Join Date
    Jun 2006
    Location
    Norristown state hospital
    Posts
    2,392
    Thumbs Up/Down
    Received: 215/4
    Given: 1/0
    Rep Power
    17
    Aren't rents/debts like this suspended for the time being?

    0 Not allowed! Not allowed!

  3. #3
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13
    Well, within Glendale, if any of us were unable to pay the rent, we wouldn't be evicted, but, we would have a 6 month grace period for each month rent isn't paid, and would have to pay it back. I haven't yet spoken with Storage, Etc regarding their locker rental fees. At best, it would be similar to that, or, at worst, you don't pay, you loose. As that rent now cost me $460 a month to keep the lockers, I'm so close to bankruptcy, I have to do something. For all I know, Covid19 will take care of that and I become a statistic. Hope not, but, I am 70 yrs old. California hasn't yet become like NY, but only time will tell, and the good LORD's grace.

    0 Not allowed! Not allowed!
    Last edited by nevetslab; 03-27-2020 at 01:34 AM.
    Logic is an organized way of going wrong with confidence

  4. #4
    Supporting Member The Dude's Avatar
    Join Date
    May 2010
    Location
    Sioux Falls, SD
    Posts
    6,934
    Thumbs Up/Down
    Received: 1,695/2
    Given: 1,220/1
    Rep Power
    18
    This makes me sad. Believe me. I'll be stewing on anybody I know in the area that could store your gear for a while. I don't have a lot of contacts in your area, so don't hold your breath, but my brain will be working. Best of luck to you nevets!

    3 Not allowed! Not allowed!
    “Yeah, well, you know, that’s just, like, your opinion, man.”

  5. #5
    Old Timer Leo_Gnardo's Avatar
    Join Date
    Sep 2012
    Location
    Dogpatch-on-Hudson
    Posts
    6,890
    Thumbs Up/Down
    Received: 1,785/21
    Given: 1,462/0
    Rep Power
    14
    Nevets you should copy those photos & list of items to MEF's Flea Market.

    Also - permit me to commiserate. I've always been awestruck by your collection of test gear. Not only the items, but that you know how to use them! And now all this other stuff besides. It has got to be a major drag to have to liquidate the collection, or even some major part of it. I know, someday it's gonna be my turn, way too soon (I hope not!) and I should give some thanks as well to those techs who retired, moved or whatever, and sold me their old stuff cheap, & even gave me a lot. Gotta right-size the collection, think of it that way.

    Best of luck nevs, hauling & stacking, listing & selling. And I hope Center Staging gets back into gear real soon.

    2 Not allowed! Not allowed!
    Enjoy. Every. Sandwich.

  6. #6
    Senior Member
    Join Date
    Jan 2011
    Location
    NorCal
    Posts
    487
    Thumbs Up/Down
    Received: 105/10
    Given: 118/0
    Rep Power
    10
    Ah, man, this is tough news. I hope you can look on the bright side--throwing shit out is liberating! But this is good shit, and hopefully you can find it loving homes. I'll send a note to my engineer friend in the area.

    0 Not allowed! Not allowed!
    --
    I build and repair guitar amps
    http://amps.monkeymatic.com

  7. #7
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13
    Quote Originally Posted by xtian View Post
    Ah, man, this is tough news. I hope you can look on the bright side--throwing shit out is liberating! But this is good shit, and hopefully you can find it loving homes. I'll send a note to my engineer friend in the area.
    I don't know when I'll gain access to my shop at CenterStaging, as that's where all my shipping supplies and industrial tape shooter is. But, having an abundance of gear that's not getting used, I'm sure there might be something you're on the lookout for that I might just have as a thank-you gift for your generosity with the Apple iPhone and the deal on those EF-86 tubes. I only got as far as having the Matchless DC30 brought down from the shelves above (our rental gear is stored in three and four tiers tall shelves.....frightening when you look up from the floor and see high up the amp you need to have brought down to service. I ran out of time the last day we were open, so on the rebound, I'll get a chance to try those tubes out.

    I know my sister in Las Vegas will be thankful the day I don't have the monthly payments of buying all that gear in storage over and over again. She doesn't understand the concepts of being fully tooled in all disciplines involved in. Most tools and equipment resides inactive....until you need it. It gets crazy when one gets involved in MANY areas of interest. First class in Black & White Photography taught by a gifted artist who knew the full process and had an 'eye', I was hooked immediately once exposed to the dark room. 3 hours in a class of 15 students in a large darkroom just wasn't enough time. The school (El Camino Community College in Torrance, CA) has a wonderful well-equipped woodshop, so I spent seven semesters in there building my dark room furniture, using........free lumber from all the sheet metal pallets that the sheet metal for BGW Systems came strapped on. I'm also going to loose that milled lumber I processed while there, with materials for two nice wood-working benches still waiting completion...though no place to set them up.

    A two-story industrial building....say 20,000 sq feet would be about right for a full wood shop, machine shop, photo lab, electronics lab, graphic arts, library, office and, of course, recording room/control room. Living quarters above. Dream on, though that was the pursuit.

    1 Not allowed! Not allowed!
    Logic is an organized way of going wrong with confidence

  8. #8
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13
    Quote Originally Posted by Leo_Gnardo View Post
    Nevets you should copy those photos & list of items to MEF's Flea Market.

    Also - permit me to commiserate. I've always been awestruck by your collection of test gear. Not only the items, but that you know how to use them! And now all this other stuff besides. It has got to be a major drag to have to liquidate the collection, or even some major part of it. I know, someday it's gonna be my turn, way too soon (I hope not!) and I should give some thanks as well to those techs who retired, moved or whatever, and sold me their old stuff cheap, & even gave me a lot. Gotta right-size the collection, think of it that way.

    Best of luck nevs, hauling & stacking, listing & selling. And I hope Center Staging gets back into gear real soon.
    I WILL be posting images and a list of items on MEF's Flea Market. I figured I'd start here first. One thing the years of collecting premium grade instrumentation was learning how each worked, seeing how they were built, sparing no expense in doing it right (General Radio, Hewlett-Packard, Tektronix, Bruel & Kjaer, etc). Being able to obtain 5-7 year old & and older gear at pennies on the dollar from what they originally cost, which industry and the millitary funded with our tax dollars, it's just always been a pleasure to be able to work with such cool gear. Today's technology is so much more powerful with so much capability, though the discrete boxes of the era I've been buying teaches you the basics. And, had to restore many of them to operational status, so there was always a learning curve. Most, though not all is supported with the manufacturer's Operators/Service manuals, which I was always tracking down. When I had access to a Xerox color copier, I was also generating high end reproductions and selling those on ebay for a couple years or so, back in the day when you could email a buyer in an auction on a piece of gear, not having the manuals, and offer affordable documents for their purchase.

    Well, the adventure of depletion and downsizing begins tomorrow.

    0 Not allowed! Not allowed!
    Logic is an organized way of going wrong with confidence

  9. #9
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,815
    Thumbs Up/Down
    Received: 945/1
    Given: 693/1
    Rep Power
    14
    So very sad to hear about your situation. That's a truly amazing collection of gear and I can only imagine how hard it must be to part from it. I hope you can find good homes for it all. The very best of luck in these tough times.

    0 Not allowed! Not allowed!
    Last edited by nickb; 03-27-2020 at 06:16 PM.
    Experience is something you get, just after you really needed it.

  10. #10
    Bent Member Chuck H's Avatar
    Join Date
    May 2007
    Location
    pacific north west
    Posts
    16,474
    Thumbs Up/Down
    Received: 3,094/5
    Given: 3,732/0
    Rep Power
    32
    Just going to put this out there...

    Any members in the area that can house some of this stuff on nevetslab's behalf so it can be reclaimed if/when he works out a better option?

    EDIT: Redundant pieces could be sold through the well known on line auction site, but only if there's time to do it. As in, a place for the stuff to be in the interim. That $$$ could compensate anyone willing to house the pieces he needs to keep for the future.?. Just trying to be creative here. I don't think nevetslab would ever come out and ask for this. But I can do it on his behalf.

    8 Not allowed! Not allowed!
    Last edited by Chuck H; 03-27-2020 at 02:15 PM.
    "Take two placebos, works twice as well." Enzo

    "Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas

    "Being born on third base and thinking that you must have hit a triple is pure delusion!" Steve A

  11. #11
    Supporting Member The Dude's Avatar
    Join Date
    May 2010
    Location
    Sioux Falls, SD
    Posts
    6,934
    Thumbs Up/Down
    Received: 1,695/2
    Given: 1,220/1
    Rep Power
    18
    The shi+ of it is that nobody's buying anything right now (except apparently toilet paper). It's a bad time to unload gear. If we could help find a place to store it, the eventual outcome would be much better, whether the gear is sold or kept.

    4 Not allowed! Not allowed!
    “Yeah, well, you know, that’s just, like, your opinion, man.”

  12. #12
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,815
    Thumbs Up/Down
    Received: 945/1
    Given: 693/1
    Rep Power
    14
    Isn't the US sending out checks to all taxpayers? Could that be a lifeline for you?

    1 Not allowed! Not allowed!
    Experience is something you get, just after you really needed it.

  13. #13
    Bent Member Chuck H's Avatar
    Join Date
    May 2007
    Location
    pacific north west
    Posts
    16,474
    Thumbs Up/Down
    Received: 3,094/5
    Given: 3,732/0
    Rep Power
    32
    Quote Originally Posted by The Dude View Post
    The shi+ of it is that nobody's buying anything right now (except apparently toilet paper). It's a bad time to unload gear. If we could help find a place to store it, the eventual outcome would be much better, whether the gear is sold or kept.
    +1 on the fetching price for used bench gear. But really... Used scopes, etc. are kind of stupid affordable compared to their original purchase price. How much could they go down? So instead of $150 for one of those scopes it's $120? But yes. I'm sitting on some things I was hoping to sell right now too. They can bury it with me if I starve because I'm not giving it away while I live.

    1 Not allowed! Not allowed!
    "Take two placebos, works twice as well." Enzo

    "Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas

    "Being born on third base and thinking that you must have hit a triple is pure delusion!" Steve A

  14. #14
    Supporting Member The Dude's Avatar
    Join Date
    May 2010
    Location
    Sioux Falls, SD
    Posts
    6,934
    Thumbs Up/Down
    Received: 1,695/2
    Given: 1,220/1
    Rep Power
    18
    Quote Originally Posted by nickb View Post
    Isn't the US sending out checks to all taxpayers? Could that be a lifeline for you?
    I just looked into that and started a thread in the Lobby. Thanks for the incentive to dig!

    0 Not allowed! Not allowed!
    “Yeah, well, you know, that’s just, like, your opinion, man.”

  15. #15
    Supporting Member The Dude's Avatar
    Join Date
    May 2010
    Location
    Sioux Falls, SD
    Posts
    6,934
    Thumbs Up/Down
    Received: 1,695/2
    Given: 1,220/1
    Rep Power
    18
    Quote Originally Posted by Chuck H View Post
    +1 on the fetching price for used bench gear. But really... Used scopes, etc. are kind of stupid affordable compared to their original purchase price. How much could they go down? So instead of $150 for one of those scopes it's $120? But yes. I'm sitting on some things I was hoping to sell right now too. They can bury it with me if I starve because I'm not giving it away while I live.
    So thirty bucks less per piece of "The Nevets Collection"? That could be thousands of dollars.

    1 Not allowed! Not allowed!
    “Yeah, well, you know, that’s just, like, your opinion, man.”

  16. #16
    Bent Member Chuck H's Avatar
    Join Date
    May 2007
    Location
    pacific north west
    Posts
    16,474
    Thumbs Up/Down
    Received: 3,094/5
    Given: 3,732/0
    Rep Power
    32
    Quote Originally Posted by The Dude View Post
    So thirty bucks less per piece of "The Nevets Collection"? That could be thousands of dollars.
    Good point!

    0 Not allowed! Not allowed!
    "Take two placebos, works twice as well." Enzo

    "Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas

    "Being born on third base and thinking that you must have hit a triple is pure delusion!" Steve A

  17. #17
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13

    Recovered assets now at home

    Friday I spent the day extracting equipment from the lockers and moving them into my upstairs apartment. I had time for two trips before cutting the rental Dodge Ram Crew-cab pickup I rented from Enterprise for $41. Took the time to capture fresh images on the Apple iPhone5, then began the process of moving stuff out of the way to get the first load out. My second trip was to extract all of my photography gear out, along with most of the small bench instruments I had tucked away in the space underneath my former bunk bed (retasked as a loft for upper storage, with the shelves below previously packed with photography gear, darkroom gear and small bench instruments). I'll still have to come back to extract my technical library, though I know I won't have the space for all of that in my one-room apartment.....but will do what I can.

    Some of the gear brought back:

    Click image for larger version. 

Name:	LeCroy 7200A-1.jpg 
Views:	20 
Size:	340.3 KB 
ID:	57578 Click image for larger version. 

Name:	HP 7090A Digital Plotter.JPG 
Views:	18 
Size:	276.6 KB 
ID:	57579 Click image for larger version. 

Name:	Wavetek Model 95 & Model 98 Genrators.JPG 
Views:	18 
Size:	332.8 KB 
ID:	57580 Click image for larger version. 

Name:	Wandel & Goltermann SPM-19 & PS-19.JPG 
Views:	18 
Size:	349.1 KB 
ID:	57581 Click image for larger version. 

Name:	LeCroy 9112-WG SG4 Storage Display.JPG 
Views:	19 
Size:	265.1 KB 
ID:	57582 Click image for larger version. 

Name:	HP 4470A Xstr Noise Analyzer-WG PS19 Generator.JPG 
Views:	18 
Size:	232.3 KB 
ID:	57583 Click image for larger version. 

Name:	GR1381-Wavetek 132-Wavetei 75-Fluke Dig Thermometer.JPG 
Views:	17 
Size:	237.6 KB 
ID:	57584 Click image for larger version. 

Name:	HP467A-6920B-6181B-204D-Simpson 464.JPG 
Views:	20 
Size:	322.3 KB 
ID:	57585 Click image for larger version. 

Name:	HP 3581A Wave Analyzer.JPG 
Views:	17 
Size:	365.5 KB 
ID:	57586

    My LeCroy 7200A Digital Scope (color display), which needs to sit on my Tektronix K217 wide scope cart, still in the lockers with the older 7200 Monachrome display....neither of them now power up, so that should be an interesting adventure in restoration. The 7200A is based around a Intel 486 CPU, while the 7200 is a 68000 CPU system. Last time I saw the 7200A work, it's image size had shrunk to about 1/3 of the normal image, then prior to moving out of Gardena, neither instrument lit up. I think I paid $1500 for that scope...the most I've paid for any used lab instrument.

    The Wandel & Goltermann SPM-19, PS-19 & SG-4 Display make up a 25MHz Spectrum Analyzer/Tracking Generator. Those who recall details of the role Jodie Foster played in the movie Contact (Dr. Eleanor), who in one of the scenes in the lab searching for different noisy star clusters, there was that same SPM-19 tuned narrowband wave analyzer that she was using. That set of three instruments are a beautiful set of instruments, but, within a small shop bench, just are way too big and not suitable for everyday use. The HP 3581A is a low bandwidth instrument (5-50kHz) with a bit higher resolution...a metered version of the HP 3580A Spectrum Analyzer, which I do have sitting atop my Tek 7633 Storage Scope in my shop.

    The HP 7090A Digital Plotter is both an analog and digital interface box, uses the plotter transport of their 7475A 6-pen plotter. Both my HP 3580A, 3581A Spectrum/Wave Analyzers talk to it great, as does the Wavetek Model 98 1MHz Synthesized Power Oscillator for Bode Plots. Not shown in this batch of gear, but in the next batch is the HP 3575A Gain/Phase Meter, which with the Wavetek Model 98 yields great Gain/Phase plots with 80dB dynamic range.

    That HP 4470A Transistor Noise Analyzer is HP's approach to the instruments Quan Tech produced (I have two versions of their Model 310 Xstr Noise Analyzers up in my loft in one of the lockers). They come in handy in screening out the quietest semiconductors of a selected device type in qty for use in discrete amplifier circuits. The Quan Tech had the added features of discrete meters for 10Hz, 100Hz, 1kHz, 10kHz & 100kHz noise bands, while this HP instrument, you have to dial them up in 10-30-100-300Hz......30k-100KHz spot frequencies.

    That LeCroy 9112 Arbitrary Waveform Generator never had the companion Keyboard until last summer, when I looked to see if any had surfaced and be affordable...finally found one for $60 + shpg, though until now, haven't had the two together to see that it's now a working set. There's a pair of AA-size NiCd batteries in the rear panel of the 9112, which by now are probably dead from disuse. In the past, it being one of many of my instruments talk via HP-IB to a controller computer to set up the waveforms and run the instrument. Once programmed, the keypad can call up any of the programs as well as the normal functions that we're used to having via control knobs. It's a 12-bit resolution 2-channel generator (72dB dynamic range with regards to signal purity).

    The Fluke 2190A Digital Thermometer with it's companion 10-Ch scanner and battery pack was sitting on the shelf with all the photo gear, so I grabbed it, being small enough to bring home. Brought the box of both J-type and K-type thermocouples back, thought for my modest needs these days, it's a luxury to have....also being more of R & D than maintenance work. That's the last of that packaging style of Fluke instruments I kept, having sold the other ones years ago.

    The HP 6920B Meter Calibrator, while not having high resolution, does provide up to 1000V 60Hz AC or DC, and up to 10A of current for basic meter calibration work. There's some other calibration gear that are shown in the next collection. I did bring back my HP 463A Precision AC Amplifier, which is capable of 100VAC/5W, with a bandwidth of 1MHz, if memory serves. It needs switch contact maintenance, but was a beauty that HP produced in the early 70's. There's also that HP 467A Power Amplifier, which is a combination 0-20VDC and a Power Amp with gain from X1, X2, X5 & X10, with a peak output of 20V P-P, good for 500mW. Limited use, but found it at a swap meet cheap and couldn't resist it. That HP 6181B DC Current Source hasn't had much use, but handy in an R & D Lab when you need that sort of thing. The HP 204D was the best of their small oscillators produced in that series, always works, small and very portable. Square Wave output on the rear for sync or Square Wave source.

    More to come.

    0 Not allowed! Not allowed!
    Last edited by nevetslab; 03-30-2020 at 06:23 AM.
    Logic is an organized way of going wrong with confidence

  18. #18
    ToneOholic! big_teee's Avatar
    Join Date
    Jun 2010
    Location
    Mid-South USA
    Posts
    11,832
    Thumbs Up/Down
    Received: 1,092/32
    Given: 1,043/14
    Rep Power
    22
    It is pretty gear, but all looks real heavy!
    T

    0 Not allowed! Not allowed!


    "If Wishes Were Horses, Beggars Would Ride!" Scottish Proverb 1600s
    Terry

  19. #19
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13

    More Gear in the Nevetslab Collection in Storage

    Friday, it feels like I barely broke the surface of extracting gear from my lockers. It felt odd being behind the wheel of a new Dodge Ram Crew-cab Pickup Truck driving down the sparsely-full freeway thru Downtown LA to the lockers near the Interstate 110 and 405 in Torrance. I pulled out my Roland TD-10 V-Sessions Drum Kit and loaded it in, which I had packed up in TD-30 boxes I grabbed from CenterStaging (we have a Roland Artist Relations office at our complex and someone had one day unpacked a new TD-30 kit, so, I naturally grabbed all the boxes for the day I'd have to sell/ship the TD-10 set. No box for the drum rack, which is different for the TD-30 from my TD-10 kit. Moving that out of the truck and into the small garage storage locker here at the apartment required a neighbor's help and patience....just barely got the rack into the locker. My controller for the kit is at my shop for use with the Porter-Davies Powered Drum Stool/Amplifier system I often have to service. Paid $3300 for that kit....not sure what I'll get for it these days, though well before this Covid19 crisis, I had seen them selling in the mid-$1000 range. Barely enough to cover my monthly expenses, though I don't even want to think what it's cost me to keep all this gear in storage.

    Some additional images of gear tucked away in the main locker:

    Click image for larger version. 

Name:	Locker 119--11.JPG 
Views:	19 
Size:	370.4 KB 
ID:	57588 Click image for larger version. 

Name:	Locker 119--15.JPG 
Views:	17 
Size:	277.2 KB 
ID:	57589 Click image for larger version. 

Name:	Locker 119--14.JPG 
Views:	19 
Size:	362.3 KB 
ID:	57590 Click image for larger version. 

Name:	Locker 119--18.JPG 
Views:	18 
Size:	341.9 KB 
ID:	57591 Click image for larger version. 

Name:	Locker 119-Rt side wall-5.JPG 
Views:	16 
Size:	314.5 KB 
ID:	57592 Click image for larger version. 

Name:	Locker 119-Rt side wall-1.JPG 
Views:	17 
Size:	334.7 KB 
ID:	57593 Click image for larger version. 

Name:	Locker 119-Rt side wall-4.JPG 
Views:	16 
Size:	375.2 KB 
ID:	57594 Click image for larger version. 

Name:	Locker 119--8.JPG 
Views:	16 
Size:	320.5 KB 
ID:	57595 Click image for larger version. 

Name:	Locker 119--9.JPG 
Views:	17 
Size:	300.4 KB 
ID:	57596

    That's the wider Tektronix K217 Scope Cart which works great for the large scopes like the LeCroy 7200A. Next to that is an EDC MV116 DC Voltage Standard, with two Tektronix calibration instruments below...the Standard Amplitude Calibrator (which was standard feature on their older 500 series scopes), and the Type 184 Time Mark Generator for time-base calibration. In the next image, sitting below those Tek instruments is a 5-bay Power Supply rack made by Preston Scientific...four of their Model MOD-X101 0-50VDC @ 0-500mA, and one Model 101 0-30VDC @ 500mA. Older-looking instruments, but beautifully constructed. I've used those for decades for general purpose shop/lab use.

    The vertical stack of gear sitting underneath the Neutrik RT1M & RT2 Rapid Test Audio Analyzers is an Analogic 6100 Waveform Analyzer with a 650 Interface Plugin installed, which talks to the Model 650 Preamp. That combination yields a 16-bit resolution 1MHz BW 4-Ch Digital Scope, which works beautiful for Sound & Vibration work Ultrasonic work (Marine Acoustics), having all the refinements of digital scopes, with 96dB dynamic range in the FFT mode or Analog/time modes. Most Digital scopes are 8-bit resolution, though by now, 12 bit may be commonplace....I haven't looked lately. I've always preferred the resolution of fine CRT's for waveform purity visually. In that same cluster of gear are Analogic D1000 2-Ch Preamps, which work as standalone preamps, or in partnership with the Analogic 620 Plugin, to provide 20MHz 8-bit resolution scope use with the Analogic 6000 series mainframe. Their 6100 mainframes take a different plugin..620-1, as the plugins aren't compatible between the two mainframe series.

    Next to that image is the ESI 296 Impedance Bridge (120Hz/1kHz), which I had in the BGW Systems Engineering Lab for years. I have the cable-extended 4-terminal Kelvin component fixture, as well as a custom-built 4-terminal Kelvin adjustable span fixture for Radial lead components, plus another for plugging in the Keithley 4-Terminal Kelvin clips.

    The next image shows some of my Tektronix scopes...backups for my prime 7834 Storage Mainframe and the 7633 Storage Mainframe that I have in my shop. Sitting atop the 7834 as a unique Dual Beam Storage Scope they produced in the late 60's...the 5031. My first really nice Tek Scope was an R5031 Dual Beam 1MHz Scope, each channel having differential 10uV-10V sensitivity vertical amps along with Current Probe inputs. It's essentially a non-plug-in 7000 series scope, for those familiar with their 7000 series. Another beautiful audio range instrument, which in XY mode, with a Wavetek 185 Log-Lin Sweep Function Generator and an HP 3575A Gain/Phase meter, you get a low-bandwidth Network Analzyer or frequency response analyzer for working with EQ, Filters, Room Acoustics with the precision microphones & preamps (the Wavetek 185's signal can be warbled with constant bandwidth in it's frequency sweep, so I made liberal use of the 5031 storage scopes over the years. That non-rack version (I have a couple R5031's) will come back home, it needing power supply work, but it saw very little use prior to my buying it years ago. Another favorite that I'm hoping to hang on to. But, I also have the R5031's, as well as the non-storage version the R5030 which I have tucked away here at home in a road case. Great shop scope!

    The last two images is an interesting box I picked up a TRW Radio Amateur's Technical Swap Meet years ago...an Optimation PA15 Power Amplifier. It needs to be put back into operational service. Small box 2U-Half-Rack size box, VERY HEAVY. I've never had the covers off, but there must be a sizable power and output xfmr inside, based on the switchable Impedance Taps for the output. Meter range covers 0-300mA & 0-160VAC. Mostly for calibration use, and other non-speaker applications in the physics lab, but, something I couldn't resist buying when I found it, paid $15 for it. I forgot to throw it into the truck last Friday, but will bring that home. Not seen, but tucked away is another Optimation product...a 4-digit 0-100kHz Low Distortion Oscillator, not unlike the 4-digit Krohn-Hite Oscillators. I'll get photos of it, once I find it.

    More to come.

    0 Not allowed! Not allowed!
    Last edited by nevetslab; 03-30-2020 at 06:30 AM.
    Logic is an organized way of going wrong with confidence

  20. #20
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13
    My body, two days later, will attest to that!

    2 Not allowed! Not allowed!
    Logic is an organized way of going wrong with confidence

  21. #21
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13

    Got most of the Technical Library moved home

    Yesterday, I rented a pickup truck again and drove down to the lockers, with the task of extracting as much of the Technical Library crates from the main locker. By the time I had pulled out nearly all of the blue milk crates used for containing all of the instrument Operators/Service manuals in my inventory, along with technical books, catalogs and such, the back of the smaller pickup truck was full. There's still more books on the shelves in the locker, as well as in boxes, but I had to leave those until the next trip. I also was able to extract my HP Network Analyzer System (HP 3330B/3570A) and H Spectrum Analyzer System (HP 3330B/3571A), along with one of my Tektronix R5031 Dual Beam Storage scopes as a display for either of these systems. I also extracted my Bafco 916AXH & 916A Frequency Response Analyzers.

    I had forgotten how heavy each of those manual/book crates were. Around the same weight as a case of copier paper (10 packs of 250 sheets?). Felt like at least 50 lbs. It didn't take long to load the truck at the lockers, since I had access to one of the many large dollies at the facility, but getting them out of the pickup onto the small hand truck I inherited from my Dad's estate and then up the flight of stairs, while moving the dolly up and down the stairs separately, it took from 1PM until 7PM, having to stop constantly to catch my breath & regain my strength. By 3PM, it was clear I wasn't making a second trip to the lockers, so I just paced myself, while hauling all that upstairs nearly wiped me out.

    As I had learned before, stacking these milk crates on their sides for library shelf use, they don't stack so well, plus the added combined weight tends to stress the crates, plus the stability worsens as the stack height grows. I only had the space for two columns wide of the larger Blue crates, but had three of the narrower crates, which I partially tucked behind the HP Network Printer/cabinet. When I was thru, I planted a Manfroto Autopole cammed in between the floor & ceiling, with a mafer clamp parked at the center top corners of the top crates, forcing them all the way back, so now the library stack is stable. Earthquake proofing, just in case. The two larger boxes filled with all my Music Studio manuals and more lab manuals got loaded into two of the five drawers of a large filing cabinet next to my lab bench in the living room area. Nothing in the apartment is domestic, apart from the kitchen, bathroom and bedroom.

    I thought I'd have time yesterday to partially unpack my smaller locker, so I could extract my JBL 2390 HF horn/lens cabinets and move them to the other locker, now having more floor space again. Those have been my favorite sounding HF horns, with the serpentine folded lens taking that beaming out and giving a much softer edge to the compression horn/drivers. They're all I have left from my band's sound system, having hoped over the years I'd get around to building a pair of Augsperger Studio Monitors with them. Not likely at this point in my life. Equipped with JBL 2441 Alnico 4" VC drivers. Hopefully they still have financial value.

    Click image for larger version. 

Name:	Library-1.JPG 
Views:	23 
Size:	951.6 KB 
ID:	58095 Click image for larger version. 

Name:	Library-13.JPG 
Views:	16 
Size:	798.0 KB 
ID:	58096 Click image for larger version. 

Name:	Library-2.JPG 
Views:	16 
Size:	878.8 KB 
ID:	58097 Click image for larger version. 

Name:	Library-9.JPG 
Views:	16 
Size:	816.0 KB 
ID:	58098 Click image for larger version. 

Name:	Bafco 916A-916AXH.JPG 
Views:	19 
Size:	494.3 KB 
ID:	58099 Click image for larger version. 

Name:	HP 3330B-3570A-2.JPG 
Views:	18 
Size:	771.5 KB 
ID:	58100 Click image for larger version. 

Name:	HP 3571A-3575A-Tek R5031.JPG 
Views:	17 
Size:	723.8 KB 
ID:	58101

    Bafco 816aXH Frequency Response Analyzer.pdf

    After pulling out the Bafco 916AXH in my locker, I found my HP 3591A/3594A Wave/Spectrum Analyzer. While it didn't have a CRT, and normally used a storage scope in XY mode, along with an XY plotter, it had much higher range than my HP 3580A Spectrum Analyzer, whose top end is 50khz, vs the 3591A's 620kHz top end. I'll be putting that up for sale cheap, as it needs work. I have all the manuals for it, plus one or two spare 3594A Sweeping Local Oscillators. The 3591A has a Balanced Input with a number of controls for selecting impedance/matching, which the HP 3590A is unbalanced input. I've attached an HP Journal article detailing it's characteristics. Great box, though retired it for the Bruel & Kjaer 2010/1902 Analyzer/Distortion Unit.

    HP 1968 Journal-HP3590A.pdf

    Getting up this morning certainly took more effort than usual. At least the smaller Toyota pickup was much easier to maneuver in my small apt parking lot than that Dodge Ram pickup was. Got it dropped off and came back, then captured more photos for my records.

    4 Not allowed! Not allowed!
    Last edited by nevetslab; 04-18-2020 at 10:41 PM.
    Logic is an organized way of going wrong with confidence

  22. #22
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,815
    Thumbs Up/Down
    Received: 945/1
    Given: 693/1
    Rep Power
    14
    Sounds like one tough day. Where did you get all this equipment from?

    0 Not allowed! Not allowed!
    Experience is something you get, just after you really needed it.

  23. #23
    Senior Member trobbins's Avatar
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    756
    Thumbs Up/Down
    Received: 122/0
    Given: 3/0
    Rep Power
    11
    Perhaps some equipment needing repair will move in to someones hands that can enjoy the process of fixing and then the practical use of the equipment - in some ways the equipment can outlast us all. I've just fixed a HP 3325A generator to 99% - at least most issues are power supply, electrolytic cap, or able to be signal tracked to a brickwall failed part, and HP vintage equipment has the advantage of leaded parts, good manuals, and well laid out internals, although they often used bleeding edge methods which in the 3325A case has meant some ferreting back through many stages. Anyway, like vintage guitar amps, a lot of vintage HP-like gear can have an afterlife.

    I have one local guy who has saved stacks (as in library stacks) of equipment manuals from defunct companies. Slowly some of them may be scanned and distributed on-line for the betterment of everyone, compared to parcel posting them out on loan. I just fixed a Systron Donner counter thanks to one of those manuals, and helped the cause by scanning the manual. And I just PM'd a guy on diyaudio for a scan of a service manual he has - he says he had emailed that manual to 61 people over the last decade - the world can be a small place in some ways.

    1 Not allowed! Not allowed!

  24. #24
    Old Timer Leo_Gnardo's Avatar
    Join Date
    Sep 2012
    Location
    Dogpatch-on-Hudson
    Posts
    6,890
    Thumbs Up/Down
    Received: 1,785/21
    Given: 1,462/0
    Rep Power
    14
    Quote Originally Posted by nickb View Post
    Sounds like one tough day. Where did you get all this equipment from?
    If you live in the right part of the world, jam up to the notorious Skunk Works, plus Jet Propulsion Laboratory, TRW and lots of other hi tech companies, then you hit the garage sales & flea markets, also surplus shops, well that's where Nevets has been. A lot of the sources have dried up now. Hopefully a new generation of boffins will benefit from Nevets and others like him selling off their collections. It's a similar scene a ways further north in Silicon Valley south of San Francisco, also in the aerospace and computer development zone near Seattle.

    0 Not allowed! Not allowed!
    Enjoy. Every. Sandwich.

  25. #25
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13
    Quote Originally Posted by nickb View Post
    Sounds like one tough day. Where did you get all this equipment from?
    As Leo had suggested, living in Los Angeles, there has been numerous surplus equipment dealers and the Radio Amateur Technical Swap Meets every month for decades. That was, of course, before the days of ebay. Post-ebay, all the premium sellers at the two major swap meets move onto ebay and raised their prices. Over the decades of collecting/using in the engineering labs of BGW Systems, Cherokee Recording Studios, Westlake Recording Studios, Marshall Electronics (MXL Mics), it's just been one of those passions along with acquiring tools all my life. Now, it's beginning to feel like a serious noose around my neck.

    I am looking to give shit away at this point just to get it out of the lockers, though when I run out of funds to keep the monthly rents paid on the two lockers, the legal fees that will follow with certainly put the screws to me.

    0 Not allowed! Not allowed!
    Last edited by nevetslab; 04-19-2020 at 04:33 AM.
    Logic is an organized way of going wrong with confidence

  26. #26
    Supporting Member nevetslab's Avatar
    Join Date
    Apr 2010
    Location
    Burbank, CA
    Posts
    2,110
    Thumbs Up/Down
    Received: 787/1
    Given: 1,925/1
    Rep Power
    13
    Quote Originally Posted by trobbins View Post
    Perhaps some equipment needing repair will move in to someones hands that can enjoy the process of fixing and then the practical use of the equipment - in some ways the equipment can outlast us all. I've just fixed a HP 3325A generator to 99% - at least most issues are power supply, electrolytic cap, or able to be signal tracked to a brickwall failed part, and HP vintage equipment has the advantage of leaded parts, good manuals, and well laid out internals, although they often used bleeding edge methods which in the 3325A case has meant some ferreting back through many stages. Anyway, like vintage guitar amps, a lot of vintage HP-like gear can have an afterlife.

    I have one local guy who has saved stacks (as in library stacks) of equipment manuals from defunct companies. Slowly some of them may be scanned and distributed on-line for the betterment of everyone, compared to parcel posting them out on loan. I just fixed a Systron Donner counter thanks to one of those manuals, and helped the cause by scanning the manual. And I just PM'd a guy on diyaudio for a scan of a service manual he has - he says he had emailed that manual to 61 people over the last decade - the world can be a small place in some ways.
    When I had the time and keys to BGW Systems, where there was a beautiful Xerox color copier, I was running off copies of manuals. Now, I could do well with a B-size high resolution scanner, as nearly all of my manuals are originals.

    And, like vintage guitar amps, so much of the gear I've acquired is premium quality, built to last, and have been repairing them as required/time permitting, to keep them running. I never did spring for an HP 3325A, though have used them along the way. I went the route with a Wavetek 95 Arb/Synthesizer, along with LeCroy 9112 Arb/Generator. I did bring my LeCroy 7200A home, which has stopped working, so hopefully I'll be able to restore it to full operational status. It needs a Tek Scope Cart (have two in that wide format in storage)....one may end up home.....thought about bringing that home on the second trip yesterday, not knowing hauling the library assets would completely wear me out.

    I did find my General Radio 1650B, so now I have a GR 1650A I can give away, if anyone is interested. I'll post that on the Flea Market soon, though the photos may be 'stock' photos, since both bridges are still in storage. The ESI 296 Bridge is also up for grabs, though I'd at least like a few bucks for it. My GenRad 1658 DigiBridge will suffice.

    I still have to contact local and nearby states equipment brokers to see if any of them are interested in picking up what's available.

    0 Not allowed! Not allowed!
    Last edited by nevetslab; 04-19-2020 at 05:20 AM.
    Logic is an organized way of going wrong with confidence

  27. #27
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,815
    Thumbs Up/Down
    Received: 945/1
    Given: 693/1
    Rep Power
    14
    Quote Originally Posted by nevetslab View Post
    As Leo had suggested, living in Los Angeles, there has been numerous surplus equipment dealers and the Radio Amateur Technical Swap Meets every month for decades. That was, of course, before the days of ebay. Post-ebay, all the premium sellers at the two major swap meets move onto ebay and raised their prices. Over the decades of collecting/using in the engineering labs of BGW Systems, Cherokee Recording Studios, Westlake Recording Studios, Marshall Electronics (MXL Mics), it's just been one of those passions along with acquiring tools all my life. Now, it's beginning to feel like a serious noose around my neck.

    I am looking to give shit away at this point just to get it out of the lockers, though when I run out of funds to keep the monthly rents paid on the two lockers, the legal fees that will follow with certainly put the screws to me.

    I once went to a local Radio Amateur's swap meet here the South West in England just to see. I'll not mention the name. What is total pile of overpriced garbage they had and not very friendly. Clearly in a different class from where you are. As a kid I went along to the local RA club meetings (in Aberdeen) and they were a great bunch of guys, were very encouraging and held regular surplus auctions where I got many a bargain.

    0 Not allowed! Not allowed!
    Experience is something you get, just after you really needed it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Ampeg SVT-7pro power shutdown
    By mnow in forum Music Electronics
    Replies: 15
    Last Post: 08-03-2018, 08:28 AM
  2. Princeton 112 Plus - Shutdown MOD
    By Jayz in forum Mods & Tweaks
    Replies: 3
    Last Post: 04-29-2014, 01:38 AM
  3. Princeton 112 Plus - Shutdown MOD
    By Jayz in forum Maintenance, Troubleshooting & Repair
    Replies: 0
    Last Post: 09-03-2013, 05:19 PM
  4. New Winder building tool? (a bit OT, but it is a tool!)
    By kayakerca in forum Tools and Coil Winding Gear
    Replies: 6
    Last Post: 03-05-2013, 12:41 AM
  5. Randall B100 Shutdown
    By sturgis011 in forum Other Amps
    Replies: 3
    Last Post: 01-25-2010, 04:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •