Announcement

Collapse
No announcement yet.

Dynacord PS2000 schematic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Thanks doctor,
    Your a star. I am getting back to some old repair jobs now that we are in 'lock down' here. I have to pickup the capacitors locally on Tuesday so keep you posted on the outcome.
    Take care of yourself.

    Philly.

    Comment


    • #17
      Thanks, stay safe.

      Comment


      • #18
        UPDATE,
        I now have all channels working which turned out to be capacitor trouble on all the channels. I replaced the caps irrespective of what the problem was. Some showed normal capacity but high ESR value, two others were O/C. Now just one last problem with the reverb not working. Keep you all posted.
        Last edited by philly; 08-05-2020, 06:20 PM.

        Comment


        • #19
          UPDATE 2.
          Had a spare minute in the workshop today so had a look to see if anything sticks out that might be related to the reverb circuit. My trained eye told me that two capacitors on the power supply board look like they needed a break. When I checked them, both were o/c. Replace them and reverb and delay are now working again.
          Last edited by philly; 08-05-2020, 06:21 PM.

          Comment

          Working...
          X