Announcement

Collapse
No announcement yet.

GSP5 Digitech

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GSP5 Digitech

    I havent used my GSP5 in a few years, it is now not functioning properly. The signal and clip worked momentarily, but now the lights are out on both the signal and clip and it will freeze up shortly after powerup, channel switching and all other lights come on except for the signal and clip leds. Any help with this is way appreciated. Ideas? Thank you in advance.

  • #2
    I'm not familiar with that one it may have a factory reset.

    Comment


    • #3
      Are you using the proper power adaptor?

      For example if it wants 12VAC and you use a 12VDC adaptor, the computer portion might work, but the analog part won't, and that is the signal part.
      Education is what you're left with after you have forgotten what you have learned.

      Comment

      Working...
      X