Announcement

Collapse
No announcement yet.

behringer sps1000/02 board in pmp5000 and pmp3000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Those connections all go to the mixer panel or the power amp via connectors and cables. COnnect your new supplies up to the same connections the old panel wired to. If the old supply did not connect to chassis, then don't invent a chassis connection.
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #32
      Right, that's what I am trying to do, but I guess I am not explaining myself clearly.
      Anyway, I figured it out. I was worried about connecting the A GND to the V- of two different power supplies, but I can see that they each have their own R/C network between the terminal and ground, similar to how the original board is laid out. So I just hooked it up and nothing blew up and I got the right voltages in the right places.
      Still waiting on one connector in the mail to hook up the mixer now.
      Thanks for being patient with me and my scattered brain.

      Comment

      Working...
      X