Hi,
Im looking for some amp recommendations, any and all tips/advice would be greatly appreciated.
What would be a good combo-style amp that amplifies the input signal with minimal to no alteration of the signal in anway way? I'd like to get as close to the clean-pure sound of studio monitors as I can.
At home I'm running my Line 6 Pod xt Live through a small Behringer mixer and out to a pair of Alesis M1 studio monitors. This setup is perfect for me. I get to tweak my amp model, cabinet and mic settings in the Line 6 unit and because Im using the Alesis monitors, they are not altering the sound in any way. It comes out as clean, pure and unaltered as you like.
On the stage, my intention was to simply run the Line 6 unit directly into the mixingbaord snake and into the PA, but this is proving problematic in our practice space. For one, we have inadequate monitoring for the drummer (which I've found to be the case in most local stages as well). Another problem is I'm either too quiet through the PA or am dowining out the singer. It seems that the lack of a separate 'spatial' sound source for my guitar muddies things up for everyone else.
Im thinking something solid state but my biggest concern is the cabinet. I tried running the Pod through my Marshall Artist 3203 and 4x10 cabinet in different ways, but all results were less than satisfactory. Besides, I dont want to haul that half-stack all over the place. Any ideas?
Thanks!
Im looking for some amp recommendations, any and all tips/advice would be greatly appreciated.
What would be a good combo-style amp that amplifies the input signal with minimal to no alteration of the signal in anway way? I'd like to get as close to the clean-pure sound of studio monitors as I can.
At home I'm running my Line 6 Pod xt Live through a small Behringer mixer and out to a pair of Alesis M1 studio monitors. This setup is perfect for me. I get to tweak my amp model, cabinet and mic settings in the Line 6 unit and because Im using the Alesis monitors, they are not altering the sound in any way. It comes out as clean, pure and unaltered as you like.
On the stage, my intention was to simply run the Line 6 unit directly into the mixingbaord snake and into the PA, but this is proving problematic in our practice space. For one, we have inadequate monitoring for the drummer (which I've found to be the case in most local stages as well). Another problem is I'm either too quiet through the PA or am dowining out the singer. It seems that the lack of a separate 'spatial' sound source for my guitar muddies things up for everyone else.
Im thinking something solid state but my biggest concern is the cabinet. I tried running the Pod through my Marshall Artist 3203 and 4x10 cabinet in different ways, but all results were less than satisfactory. Besides, I dont want to haul that half-stack all over the place. Any ideas?
Thanks!
Comment