Tweet
I have an old ART Systems T-28 Attack Module/portable twin 8” 100 watt amplifier with the carbon fiber case that has an accutronics Type 1 - 1EB2C1B spring reverb in it that has the two broken input wires to the transducer. They are broken too close to the transducer to repair unless I unwind the transducer, which I have never attempted. My question is: The closest unit that I have found to work that I can locate from “CEDIST.COM” is a 4EB3C1B. This is a Type 4 but it has the correct impedance of 600 ohms imput and 2250 ohms output just like the original unit with a longer decay time of 2.75 – 4.0 sec’s as opposed to the original reverb of 1.75-3.0 sec’s. Does anyone know if this will work? Will it be too long of a decay time for this application? Also, accutronics website did not specify what Type 1 is opposed to type 4. I would like to know before I order this unit as the old part is nowhere to be found. Thanks for your input!
Comment