Tweet
Hi All, I've picked up from ebay a Berhringer eurorack mixer mx2442a with out the power supply for spare parts.. it's main connector socket is damaged and some of the pins have been broken and apart from that it's in good order.
Does any one know the correct wiring for the pins out for the multi connector as I want to build a power supply unit to power it up. I've seen the rack unit and on the rear of the unit it read's +/-18v..12+..+48..+5 volts and it's a 150w type unit.
any advice on the pin connections would be grateful.
Does any one know the correct wiring for the pins out for the multi connector as I want to build a power supply unit to power it up. I've seen the rack unit and on the rear of the unit it read's +/-18v..12+..+48..+5 volts and it's a 150w type unit.
any advice on the pin connections would be grateful.
