help troubleshoot this.....i got nothin

[RDK]

Peavey Windsor
Had a blown fuse onboard. I checked my voltages in my filter caps and it was around 300. Drained the caps. Soldered in a new fuse. Put the tubes in. Turn on. Even less than before i put in the fuse. No fuses blew. But im not even getting voltages in the caps now. Went to drain em again to see if there were voltages....got nothin. Any ideas?

[Jazz P Bass]

Peavey Winsor Schematic

Which fuse blew?
The HT fuse?

[R.G.]

Any ideas?

Light bulb limiter so you can actually measure voltages without an endless belt of fuses.

[RDK]

Was a stupid loose fuse holder by the main power source :/

[Jazz P Bass]

Cool!
If the circuit board is already out, give the thing the old eyeball, solder wise.
Touch up anything that looks odd.