Peavey Classic 30 Head

[Renuncia]

I purchased a Peavey 30 head (16 ohm) and want to run to separate speaker boxes Blue Dog and Silver Bell. Want to run together, separately with volume control for both
suggestions please

[g1]

To be able to control the volume of separate speaker cabinets requires separate amplifiers for each cabinet.

[Renuncia]

would a L-pad work?

[g1]

If it can handle the power, you could use an L-pad on one of the cabs, or both.

[Renuncia]

If I use 8 ohm speakers in series I would use an 8 ohm L-Pad or 16 ohm to keep resistance on the amp with 1 speaker shut off? Excuse my ignorance elec new to me

[Renuncia]

The L-Pads found are 100 watt 8 ohm and 100 watt 16 ohm will this suffice? Also 30 watts 16 ohms output does this divide by 2 for two speakers?

[olddawg]

I purchased a Peavey 30 head (16 ohm) and want to run to separate speaker boxes Blue Dog and Silver Bell. Want to run together, separately with volume control for both
suggestions please

I would recommend recommend checking out a Webber 50 watt Mini Mass attenuator. $125 well spent.

[Renuncia]

I would recommend recommend checking out a Webber 50 watt Mini Mass attenuator. $125 well spent.

where would this go? I assume this in conjunction with L-Pads?

[olddawg]

where would this go? I assume this in conjunction with L-Pads?

No it is an attenuator. It takes the place of an L pad but is an inductive load. Attenuators

[Renuncia]

order another, thanks, What is the major difference between the l-pad with a resister and the attenuators?