Is there an alternate part number for these pots -- early 80's Fender Champ 12

[mort]

part# 025946 250k with pull switch
part# 024662 250k

[g1]

If there are sub numbers, Fender could tell you.
When looking for Fender part #'s, sometimes it helps to add an extra zero up front.
So 002946 Fender turns up this:
https://www.tubesandmore.com/products/R-V250K-PP-SP

The other only shows overseas at TAD:
FenderŪ Style Potentiometer, A250K PC Mount, "D"- Shaft
But there may be a Fender of that type with "wings" that could be clipped off, though the D shaft is sometimes 180 degrees offset, so the knob won't sit right.

[Jquijano]

I know this is an old thread but im also looking for part number 025946 for my Fender Red Knob Twin which is a 250K audio w/ pull push switch. I bought a couple of Alpha ones in the past but they are not the same quality of Fender. Any clues where i can get one?

[g1]

You can't get them any more. And never try to straighten a bent one, it will break.