Hello,
I've bought a nearly new AC30CC2X with stock tubes. There is a problem that when the input signal gets lower (e.g. playing soft notes) the amp mutes completly after few seconds. If I hit the guitar hard again hard (large signal input) the amp plays again.
I found out that the send channel with a second amp is ok, so the problem must be after the receive input (e.g. power section) and not in the preamp section.
It is equipped with the following tubes:
1x: 5AR4 SOVTEK (R) MADE IN RUSSIA 0803
3x: 12AX7WC Sovtek (R) Made in Russia 07 09
4x: EL84EH electro harmonix Made in Russia 08 05
Any ideas?
Thnx.
Wiesl
I've bought a nearly new AC30CC2X with stock tubes. There is a problem that when the input signal gets lower (e.g. playing soft notes) the amp mutes completly after few seconds. If I hit the guitar hard again hard (large signal input) the amp plays again.
I found out that the send channel with a second amp is ok, so the problem must be after the receive input (e.g. power section) and not in the preamp section.
It is equipped with the following tubes:
1x: 5AR4 SOVTEK (R) MADE IN RUSSIA 0803
3x: 12AX7WC Sovtek (R) Made in Russia 07 09
4x: EL84EH electro harmonix Made in Russia 08 05
Any ideas?
Thnx.
Wiesl
Comment