Heater wiring

[Jarvini]

Last post has got me worried now is this correct for 1 power tube and one preamp tube ?

Coming from pilot light on left to power tube and then on to preamp tube?

[nickb]

Last post has got me worried now is this correct for 1 power tube and one preamp tube ?

[ATTACH=CONFIG]47148[/ATTACH]
Coming from pilot light on left to power tube and then on to preamp tube?

Bummer! That's not going to work. You need a color pair to every tube. A bit like this:

[Jarvini]

This is what I was trying to show excuse the crudeness of my diagram is this correct ?

Ignore the pin 3 on the left that's meant to be pin 2

[pdf64]

That's correct, but you understand that there's no benefit in twisting wires of the same polarity, eg twisting the 2 red or 2 black wires won't reduces their EM field, in the way that twisting wires of opposing polarity does?
See the best way to wire heaters The Valve Wizard

[Jarvini]

So basically run them like this?

[nickb]

So basically run them like this?
[ATTACH=CONFIG]47152[/ATTACH]

Perfect!

[Jarvini]

Brilliant thanks everyone