Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Twin Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Twin Build

    Hey Guys,
    I bought a twin chassis,I have some fender boards,50 watt mercury tranformers.Does anyone know where i could get a detailed instruction
    info from some twin DIY co. without buying a kit,My only experience in
    amp building always had detailed instructions.Any help out there?
    THANK YOU Mike C,

  • #2
    Mike C,

    Tino Zolotta's Book "Building Vacuum Tube Guitar & Bass Amplifiers"
    (Volume 2) has a complete instruction building thie Fender Twin Reverb the AA270 chassis with AB763 modications silver face to black face. I doubt if your boards will work as he uses his own design.

    All of his books are available at Antique Electronic Supply Antique Electronic Supply

    Mark

    Comment


    • #3
      I allways get all the information I can, then make my own instructions

      Comment


      • #4
        1st decide which 'twin' do you want to build. Schematics & layouts are available on a number of sites.
        Building a better world (one tube amp at a time)

        "I have never had to invoke a formula to fight oscillation in a guitar amp."- Enzo

        Comment


        • #5
          I can recommend Tino's books. I just build an amp from book 1 and it works great. The instructions were accurate and complete. I just ordered book 2 just to have it I don't know if i'll build anything out of it or not.
          [url]http://theanswerjar.com/[/url]

          Comment


          • #6
            Is it a Tweed Twin chassis (the 50's chrome box)? If so start with a schematic and layout diagram, available all over the internet. If you dig deeper you can probably find detailed assembly instructions. The Twin Reverb is a bit more difficult. Anyway, I built my first amp by following the layout diagram for a tweed Bassman.

            Comment


            • #7
              Twin Build

              Thanx Man, In wrapped up in a brownote 18 now ,But thats my next project,
              Im going to order those books,Would they be step by step detailed with pictures? Thanx Mike

              Comment


              • #8
                You might find detailed instructions on the net, but really it's just follow the drawing one component and wire at a time. One tip would be to do the power transformer and filament wiring first. While it look complex it's pretty simple when you break it down. Is it a tweed twin chassis you have?

                Comment


                • #9
                  twin reverb chasey

                  [IMG]<a href="http://s863.photobucket.com/albums/ab200/justinthegreat/?action=view&current=102_0216.jpg" target="_blank"><img src="http://i863.photobucket.com/albums/ab200/justinthegreat/102_0216.jpg" border="0" alt="Photobucket"></a>[/IMG] [IMG]<a href="http://s863.photobucket.com/albums/ab200/justinthegreat/?action=view&current=102_0215.jpg" target="_blank"><img src="http://i863.photobucket.com/albums/ab200/justinthegreat/102_0215.jpg" border="0" alt="Photobucket"></a>[/IMG] [IMG]<a href="http://s863.photobucket.com/albums/ab200/justinthegreat/?action=view&current=102_0214.jpg" target="_blank"><img src="http://i863.photobucket.com/albums/ab200/justinthegreat/102_0214.jpg" border="0" alt="Photobucket"></a>[/IMG]

                  Comment

                  Working...
                  X