Tweet
I got my hands on a Leslie Model 16 that appears to be in good shape, but it's just the mounting board with all the electronics - no connector on the end of the wires coming from the 6 pin connection. I also don't have the footswitch that I've read about originally being part of this.
Does anyone have much experience with these, or know where there is good info online? The idea here is to build a champ or deluxe that will be housed in the same cabinet as the leslie, and will only use the leslie system for a speaker (speaker will probably be upgraded). My main point of confusion is how to power the system, and what the best method of speed control for the rotar would be. From what I've read there is a pin on the 6 pin dedicated to B+, but there are also 2 pins dedicated to mains. Any ideas on this would be awesome.
Does anyone have much experience with these, or know where there is good info online? The idea here is to build a champ or deluxe that will be housed in the same cabinet as the leslie, and will only use the leslie system for a speaker (speaker will probably be upgraded). My main point of confusion is how to power the system, and what the best method of speed control for the rotar would be. From what I've read there is a pin on the 6 pin dedicated to B+, but there are also 2 pins dedicated to mains. Any ideas on this would be awesome.
Comment