Power Tranny for 5E3 with added bias tap

[Bluefinger]

Hi,

does anybody know of a power tranny that will fit a standard 5E3 cutout and mounting holes and that has the same specs but with an added bias tap? I'd like to use fixed / cathode switching in my project but would like to keep the existing chassis if possible.

thanks!

[fyl]

Use a Deluxe Reverb PT. The Magnetic Components 40-18016 works very nicely, gives vintage-correct B+ and can supply enough heater current for larger tubes.

http://www.classictone.net/40-18016.pdf

[Bluefinger]

Don't they use a larger cutout?

[MWJB]

No. They fit in a 5E3 chassis.

[fyl]

Same cutout etc. slightly higher stack o'lams.