Vox ac30 dimensions ?

[walcen]

Hi all I was wanting to start a vintage Vox ac30 build from scratch but I cant seam to find chassis dimensions any where. I can see how the chassis is built. I just need the measurements.

Any assistance with this would be appreciated.

regards

Walt

[TubeNoob]

Hey Walcen,

Seems North Coast Music is the only authorized manufacturer of Vox AC30 cabs in the U.S. these days. Their site says the dimensions are:

20.5" tall, 27.25" wide, 10.5" deep

Site: North Coast Music: Reissue AC-30 Cabinets by North Coast Music


Hope that helps!

[RWood]

For the chassis, not the cab, check this:

Vintage Amps Bulletin Board • View topic - AC30 Chassis dimensions

Inches and (metric)

Bottom section: L=21"(53.3),H=1-1/4"(3.1), flange W=5/8"(1.6),W not including flange=5-1/4"(13.3)
Vertical side section: L=21"(53.3), H=4-5/16"(12.6), Top panel W=2-7/8"(7.3), Panel lip=5/8"(1.6)

[TubeNoob]

ah of course, the chassis! well, RWood to the rescue as usual!

[walcen]

Thanks guys, I'll put all the info in the vault.

kindest regards

Walt

[TubeNoob]

Hey Walcen,

Here's a little more info for your vault from R.G.'s site should you be going for the head build:

http://geofex.com/FX_images/AC30%20Head%20Dimns.pdf