Tweet
Guys, if someone is interested, me and some guys from slocone.com made some boards for a replica of the Brown Eye. The board is inspired by the one used for the 100W models with some added improvements.
These are the specs:
- 2 oz/ft copper, 2 layers
- 3 mm thickness
- black board, white silkscreen
- IPC-A-600G class II quality
- Dimensions are 24.7 x 3 inches
- bigger traces wrt to the original in order to get me close to 20 AWG corresponding cross sectional area
- component holes that fit turrets, so that it's possible to use a PCB-turret board hybrid style
- two big ground pads on top and bottom layers like in the Friedman board
- additional grounds and 12V connection points
We have also designed and manufactured a custom chassis that fits this board and is compatible with all the controls and holes of the original models. Shoot me a pm if you're interested
DISCLAIMER: THIS IS NOT A CARBON COPY OF THE ORIGINAL BOARD. I DID NOT MANUFACTURE THE ORIGINAL AND I AM NOT TRYING TO CONFUSE THE CONSUMER OR COMPETE WITH FRIEDMAN'S BUSINESS. NO LOGO OR TRADEMARK ARE BEING USED ON THE BOARD.
ALL PRODUCT AND COMPANY NAMES ARE TRADEMARKS OR REGISTEREDŽ TRADEMARKS OF THEIR RESPECTIVE HOLDERS. THE MENTION OF THEM IN THIS POST IS FOR REFERENCE ONLY, AND IT DOES NOT IMPLY ANY AFFILIATION WITH OR ENDORSEMENT BY THEM.
These are the specs:
- 2 oz/ft copper, 2 layers
- 3 mm thickness
- black board, white silkscreen
- IPC-A-600G class II quality
- Dimensions are 24.7 x 3 inches
- bigger traces wrt to the original in order to get me close to 20 AWG corresponding cross sectional area
- component holes that fit turrets, so that it's possible to use a PCB-turret board hybrid style
- two big ground pads on top and bottom layers like in the Friedman board
- additional grounds and 12V connection points
We have also designed and manufactured a custom chassis that fits this board and is compatible with all the controls and holes of the original models. Shoot me a pm if you're interested
DISCLAIMER: THIS IS NOT A CARBON COPY OF THE ORIGINAL BOARD. I DID NOT MANUFACTURE THE ORIGINAL AND I AM NOT TRYING TO CONFUSE THE CONSUMER OR COMPETE WITH FRIEDMAN'S BUSINESS. NO LOGO OR TRADEMARK ARE BEING USED ON THE BOARD.
ALL PRODUCT AND COMPANY NAMES ARE TRADEMARKS OR REGISTEREDŽ TRADEMARKS OF THEIR RESPECTIVE HOLDERS. THE MENTION OF THEM IN THIS POST IS FOR REFERENCE ONLY, AND IT DOES NOT IMPLY ANY AFFILIATION WITH OR ENDORSEMENT BY THEM.
and well made.
Comment