I have a Heyboer Hy022772 OT with the following specs:
PT:
HV is 370-0-370 @.060mA
6.3v @ 1.5 Amp and 5v @ 2.5 Amp
I had this in a scratch build 5f1 but the plate voltage was way high. I couldn't bring it down with a bias resistor, so I ended up swapping it out for something close to the spec.
So, what I use this for?
PT:
HV is 370-0-370 @.060mA
6.3v @ 1.5 Amp and 5v @ 2.5 Amp
I had this in a scratch build 5f1 but the plate voltage was way high. I couldn't bring it down with a bias resistor, so I ended up swapping it out for something close to the spec.
So, what I use this for?
Comment