ampeg vt-40 template

[User Name]

i acquired this ampeg vt-40 cabinet this past weekend and all it was missing was the drivers. someone had previously replaced the baffle with a new one containing 2 10" holes for new speakers. unfortunately, they had offset them.

i will be replacing this baffle and drivers so i am looking for measurements for the center of each hole.

if anyone has a vt-40 that can give me the numbers, i would greatly appreciate it.

bill

[grooveman1961]

I wish I would have seen this...I have a vt-40. Still interested?

[User Name]

i am still interested.

what i need are the measurements of the baffle and the speaker holes.

as it sits, the vt-40 i have has 2 12" drivers in it for the time being.

thanks!

[hanko]

I have a VT-40. I'll measure it tonight if you're still interested (I'm at work right now).
Please forgive me if I misunderstand exactly what you're looking for. You want to know the measurements of the center of the 4 holes for the 10" speakers?

Sean

[grooveman1961]

just saw the reply

I'll get this done this weekend.