Amp Feet

[dtjacob]

Hi:

Want to remove the nail-in feet from a Fender amp......anyone have any ideas how to do this without trashing the Tolex?????

Thanks.

[Casey4s]

Are you going to replace the feet with some new ones? (Rubber?)

[dtjacob]

Are you going to replace the feet with some new ones? (Rubber?)

Yes, I'm going to either use rubber or the 2 piece vintage Fender ones (I believe they're called Sphinx Glides).

[JoeM]

What Fender amp is it? I replaced the feet on my DRRI with the better glides. The old feet just pulled out - not much really holding them in. The new ones are a larger diameter, they cover the area where the old feet were. The Tolex wasnt in issue in this case.

[dtjacob]

What Fender amp is it? I replaced the feet on my DRRI with the better glides. The old feet just pulled out - not much really holding them in. The new ones are a larger diameter, they cover the area where the old feet were. The Tolex wasnt in issue in this case.

It is a '65 PRRI, so it should be pretty much the same. Going to install cabinet corners & better glides. Will give it a shot, shouldn't be a problem; just wanted to be sure.

[JoeM]

Yeah, I added corners too. You can use one of the holes for the corners to mount the glides. (You probably already know that)

[dtjacob]

Yeah, I added corners too. You can use one of the holes for the corners to mount the glides. (You probably already know that)

Yes, I did know that. Those feet came right off, had the corners put on & the new glides in less than an hour.....looks GREAT.