My version of a Revera Venus

[olive2sing]

I've built a number of Speaker cabs, and Head shells. But this is my first amp built from scratch. It's a modified Rivera Venus, with 6V6S, instead of 6L6.

[Helmholtz]

Very nice, congrats.

Just wondering if there's enough ventilation inside the amp.

In my job I learned that the holes of perforated plates should have a diameter of at least 4mm for good air flow.

[olive2sing]

Thank you Helmholtz
I was concerned with ventilation myself. I currently have the back off. I thought about putting a temp. probe in by the output tubes, but I don't know what temperature is reasonable.