Announcement

Collapse
No announcement yet.

Where do I start?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    This schematic results in a really fun amp. I've built one myself, and it's just a whole lotta fun to play!

    Just for good measure, I'd make R9 a 5Watt or 10Watt-resistor, and slap an electrolythic capacitor 100uF / 50V or more across it with the negative terminal to ground. That way you'll get plenty of volume from the little champ!

    Comment


    • #17
      ... and just some info you'd might like: The 6AT6 can replace the half 12AX7 in the tremolo department (if you need that sort of thing - or else just scrap it!) and the EZ81 rectifier you have is plenty to support this circuit.

      Comment


      • #18
        Thank you for the help. SO I am going to try and take what I have apart. and see how closely it lines up with the schematic you provided!

        thanks again!

        Comment

        Working...
        X