Transformer wire layout help

[nosaj]

Here's the Chassis , [ATTACH=CONFIG]45380[/ATTACH][ATTACH=CONFIG]45381[/ATTACH]
My plan was to to cover larger holes that are towards the center & install my turret or eyelet board in that area & possibly drill holes (atleast one new hole ) for the power tubes , but I am not liking how close V1 will be to the Output transformer this build will have dc heaters on the preamp tubes . I wonder would if it be better if i move the OT up next to the power transformer , this is a combo amp but i think there is enough room to move the OT next to the PT .let me know what you guys think ?

They have things to pop into unused holes. I'll post some pics tomorrow in this thread.

nosaj

[nosaj]

They have things to pop into unused holes. I'll post some pics tomorrow in this thread.

nosaj

Got them from a radio shop closeout.
They just pop in.

nosaj

[copperheadroads]

Getting some of the components ready to order over the weekend ,I was thinking of possibly drilling new holes for the 5881's & using the back holes for the preamp tubes/sockets .covering over the center sockets with some sort of alloy plate .