Tweet
Color Me Stupid! or BLIND!
Jamie, Thanks. You don't know how many times I went over the circuit and saw nothing wrong. The cathode on V2a was wrong. Somehow I put in a
1 meg resistor instead of a 1500 on the cathode resistor/cap. Just goes to show you another set of eyes are better. Sounds great and all is good with pin voltages. Thank you! Thank you! Joe
As for the other items that RWood mentioned ...There were areas that were hooked up quickly to test circuit and lay out. Input jack, shielded wires have all been added and 100 ohm resistors referenced to ground off the heater wires to take the hum to almost nothing at full bore volume. Very sweet sounding and lots of bite. May add a tone pot sometime.
THANKS TO ALL WHO TOOK THE TIME TO HELP. I NEEDED YOUR EYES!
Jamie, Thanks. You don't know how many times I went over the circuit and saw nothing wrong. The cathode on V2a was wrong. Somehow I put in a
1 meg resistor instead of a 1500 on the cathode resistor/cap. Just goes to show you another set of eyes are better. Sounds great and all is good with pin voltages. Thank you! Thank you! Joe
As for the other items that RWood mentioned ...There were areas that were hooked up quickly to test circuit and lay out. Input jack, shielded wires have all been added and 100 ohm resistors referenced to ground off the heater wires to take the hum to almost nothing at full bore volume. Very sweet sounding and lots of bite. May add a tone pot sometime.
THANKS TO ALL WHO TOOK THE TIME TO HELP. I NEEDED YOUR EYES!
Comment