I have a record player amp that used a 6au6 el84 and a 6x4. PT is putting out 332 on pin1 and 332 on pin 6 of 6x4 with a rectified voltage of 447. C4a is a 40uf versus the 20uf listed on schematic getting 443 volts c4b is 10uf getting 440volts and c4c is 10uf getting 401 volts. To me this seems awfully high for a el84 even though that's what originally was in it. These voltages are with the rectifier only, have not put in 12ax7 or el84 yet. What could i do to bring voltage down or will it come down once other tubes are in?
Thanks,
Jason
Thanks,
Jason
Comment