5e3?

[chuckb]

Hey guys, I'm attempting to build a 5e3 from scratch with a eyelet board that is already layed out with the components. I have built a 5e3 circuit before but using ptp wiring with no board and it turned out great ,with lots of help for you guys here on the forum. does anyone here have a step by sep schematic such as the ones that come with the weber, mojo, kits etc? I'm unsure as to needing standoffs and also the grounding of the board. I have Mercury Magnetics trannys and a chassis that I had made to specs from 16ga aluminum .Any help would be greatly appreciated.

Chuck

[MWJB]

Go to tubeampdoctor.com, browse tweed amp kits, 5e3, there is a step by step build photo guide. Also print off a layout and hilight off connections/wires as you go.

You will need stand offs if your board has no blank "sandwich" board to go between it and the chassis, to insulate wires & components from the chassis/ground.