No announcement yet.

5e3 please give a diagnosis to my PT

  • Filter
  • Time
  • Show
Clear All
new posts

  • 5e3 please give a diagnosis to my PT

    Hallo guys,
    yesterday i've finished my5e3 homebuild amp following triode layout.
    Unfortunately, i had problems wiring filaments, having dead short to ground.
    Now, i see that testing the two green wires from my PT MMFDTP (obviously switched off) i get continuity between them.
    My question: is that ok or i've compromised my irons?
    thanks in advance
    from Sardinia island

  • #2
    If there was no fire or smoke you may be alright.
    There should be continuity between the two green wires. That is either end of the same secondary winding. Set meter to AC and see what the voltage is with one proble on each green wire.
    "Take two placebos, works twice as well." Enzo

    "Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas

    "Being born on third base and thinking that you must have hit a triple is pure delusion!" Steve A


    bostanci escort
    sisli escort mecidiyekoy escort
    pendik escort
    sex vidio
    altyazili porno
    antalya escort
    beylikduzu eskort bayan eskort bayan escort antalya sirinevler bayan escort
    gaziantep escort gaziantep escort
    atasehir escort
    antalya escort bayan escort atakoy
    izmit escort
    ankara escort
    replica watches