5E3 B+ center tap to zener diode switch or trim pot advice

[tweed]

Hi all,

I installed a zener diode on the PT center tap, it drops the voltage about 25v, which is pretty good thing. Can you please recommend me a SPDT switch specs value safe to use between the center tap and the diode? I would like to be able do go directly to ground as an option.

Many thanks

[Bruce / Mission Amps]

125vac@6amps or 240vac@3amps... etc... just about any spst rated at 125vac should be fine.

[tweed]

125vac@6amps or 240vac@3amps... etc... just about any spst rated at 125vac should be fine.

Hi, thank you for the reply. Great! Currently a have a 1/4" mini toggle rated at 5A 125 Volt, 2A 250 Volt AC.Here is the switch with zener.