Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

5E3 Scratch Build.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 5E3 Scratch Build.

    Hey Guys,

    I'm back from Italy, and ready to start this new project. The cabinet arrived while away, and it looks great!

    Now, some questions:

    I need a chassis: I would prefer to buy a stock chassis from hammond or some other mftgr, does anyone know the measurements of the 5E3 chassis?

    Transformers: What are the general thoughts about PT and OT? There are several mfgr's, what are the best quality, and which offer the best "bang for the buck?"

    Speaker: No clue here. Thoughts?

    Other than that, I'll scrounge up the passives, some G10 board, switches/knobs etc. Looking forward to slapping this beast together!

    All help is GREATLY appreciated.

    Thanks,

    Bryan

  • #2
    for european folks, hammonds are a good bang for the buck I would say... if you're from the ua, you might want to give bruce collins from mission amps a call...

    Comment

    gebze escort kurtköy escort maltepe escort
    pendik escort
    betticket istanbulbahis zbahis
    deneme bonusu veren siteler deneme bonusu veren siteler
    mobile casino no deposit bonus
    deneme bonusu veren siteler bonus veren
    bonus veren siteler
    deneme bonusu veren siteler deneme bonusu veren siteler
    bahis siteleri
    deneme bonusu deneme bonusu veren siteler Canlı casino siteleri
    mobilbahis rokubet
    deneme bonusu
    güncel deneme bonusu
    alanya escort
    deneme bonusu veren siteler
    www.oje.net
    deneme bonusu veren siteler deneme bonusu veren siteler
    Working...