Voltages ok??

[Ringwraith]

I haven't seen any voltage charts around for the 5E3 which is odd as it's such a popular build. I'm sure there out there somewhere, maybe someone can direct me to a link?

Just wondering how mine look compared to the average??
I'm using the Weber W025130 PT utilizing the brown wire as my house voltage sits at 120.
Pumping into a NOS Raytheon 5Y3.

B+ is 360V coming of the rectifier.

JJ 6V6's...
Plates are both 355V, grid is 330V & cathode is 21V

V2 JJ 12AX7
1=160V
3=1.18V
6=196V
8=48V

V1 EH 12AY7
1=125V
3=1.90V
6=128V

Thanks!
Sean

[Bruce / Mission Amps]

I haven't seen any voltage charts around for the 5E3 which is odd as it's such a popular build. I'm sure there out there somewhere, maybe someone can direct me to a link?

Just wondering how mine look compared to the average??
I'm using the Weber W025130 PT utilizing the brown wire as my house voltage sits at 120.
Pumping into a NOS Raytheon 5Y3.

B+ is 360V coming of the rectifier.

JJ 6V6's...
Plates are both 355V, grid is 330V & cathode is 21V

V2 JJ 12AX7
1=160V
3=1.18V
6=196V
8=48V

V1 EH 12AY7
1=125V
3=1.90V
6=128V

Thanks!
Sean

Close enough.

[Ringwraith]

Thanks Bruce

I just swapped out the Weber W041318 OT with the Heyboer HY041318 & noticed a slight voltage drop in the power section.
I now have 356V B+ & 344V on the 6V6 Plates. Is this still in line? The other end of the circuit hasn't changed much. (which confuses me)

Cheers
Sean

[Bruce / Mission Amps]

Thanks Bruce

I just swapped out the Weber W041318 OT with the Heyboer HY041318 & noticed a slight voltage drop in the power section.
I now have 356V B+ & 344V on the 6V6 Plates. Is this still in line? The other end of the circuit hasn't changed much. (which confuses me)

Cheers
Sean

With a real NOS 5Y3GT, those are still looking good to me.