5E3 chassis Q

[The Captain]

Hi there, can anyone remind me of these measurements on a std repro 5E3 chassis:

1. the distance between the 2 mounting bolts, and
2. the distance this hole sits in the std 5e3 cab, ie between cabs top back & the cutout area. Or from a std 5e3 top front may be easier to ask like so.

I just cant find these dimensions on the www. Thanks all

[Daveg]

The 2 mounting bolt holes are 13 1/2 " on center. And 1" in from the inside face of the back panel. The hole is slotted in this direction, so you have a little wiggle room front to back. (This is a Weber chassis.)

[The Captain]

Thanks alot for info Daveg, rgds Capt.